262 MIR BKT ADAPTER, DM3XX

Adapter to allow a DM3XX reader to be used with the DMA-262-MIR mirror bracket.  Typically used for zone-routing or similar logistics applications.  This component replaces the reader mount that comes with DMA-262-MIR assembly.  Please note that this is an application-specific accessory.  Please consult your Cognex Sales Engineer prior to purchasing in order to ensure that this item is appropriate for your application.

Important Notes:

1) The DMA-262-MIR-300BKT is not a useable solution by itself; it must be used with DMA-262-MIR.  (Order both items).

2) When using a DM3XX reader with the two items mentioned above, a S-mount (M12) lens must be used.  The recommended lens for most applications is the 10.3mm liquid lens (DM300-LENS-10LL).  Please note that approximately 1/3 of the camera field-of-view in the Y-direction will be cutoff by the mirror and will therefore be unuseable.

3) This solution will only work with a standard illumination cover, such as DM300-DLCOV-RE, or HPIL, such as DM360-HPIL-RE.  It is not compatible with HPIA or any other external lighting options.

A typical bill of material might look like the following:

• Qty. 1 --- choice of DM3XX reader
  
• Qty. 1 --- DM300-LENS-10LL (lens)
  
• Qty. 1 --- DM300-DLCOV-RE (illumination module)
  
• Qty. 1 --- DMA-262-MIR (mirror bracket assembly)
  
• Qty. 1 --- DMA-262-MIR-300BKT (mounting adapter for DM3XX)
  
• Qty. 1 --- CCB-84901-1003-05 (5m ethernet cable)
  
• Qty. 1 --- CKR-200-CBL-EXT (5m power-and-I/O cable)
  
• Qty. 1 --- DMA-CCM-1-XX (single-camera power-and-I/O module)
  

Please consult your Cognex Sales Engineer prior to placing your order to make sure you have the appropriate bill of material for your application.