Not available 
| Basic data | Series: 720 Operating principle: Throughbeam principle Device type: Receiver Contains: 2x BT-NC sliding block Application: Object measurement |
| Special version | Special version: Crossed-beam scanning Diagonal-beam scanning Ex-protected Parallel-beam scanning |
| Optical data | Operating range: 0.3 ... 7 m Measurement field length: 1,570 mm Number of beams: 79 Piece(s) Beam spacing: 20 mm |
| Measurement data | Minimum object diameter: 30 mm |
| Electrical data | Performance data Supply voltage UB: 18 ... 30 V, DC Inputs/outputs selectable Number of inputs/outputs selectable: 2 Piece(s) Type: Inputs/outputs selectable |
| Time behavior | Cycle time: 2.8 ms Response time per beam: 30 µs |
| Interface | Type: CANopen, IO-Link IO-Link COM mode: COM2 CANopen Function: Process |
| Connection | Number of connections: 2 Piece(s) Plug outlet: Axial Connection 1 Function: Configuration interface Connection to transmitter Signal IN Signal OUT Voltage supply Type of connection: Connector Thread size: M12 Material: Metal No. of pins: 8 -pin Connection 2 Function: BUS IN BUS OUT Type of connection: Connector Thread size: M12 Material: Metal No. of pins: 5 -pin |
| Mechanical data | Dimension (W x H x L): 30.7 mm x 54.8 mm x 1,623 mm Housing material: Metal Metal housing: Aluminum Lens cover material: Plastic |
| Operation and display | Type of display: LED OLED display Type of configuration: Software Operational controls: Membrane keyboard |
| Environmental data | Ambient temperature, operation: -30 ... 60 °C |
| Ex-Spezifikation | Ex-Zone: 2 22 |
| Ex specification | Ex device group: II |
| Certifications | Degree of protection: IP 65 Protection class: III Standards applied: IEC 60947-5-2 |
