0717322 PHOENIX CONTACT - Technology Bsa

HDFK 16-VP SLS/Z - Panel feed-through terminal block

Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Cable lug connection, number of positions: 1, load current: 76 A, cross section: 0.5 mm²-25 mm², connection direction of the conductor to plug-in direction: 0 °, width: 12 mm

Product Code: 0717322

Partner cod.: 0717322

PHOENIX CONTACT

Product properties	Product type: Panel feed-through terminal block Product family: HDFK 16-VP Number of positions: 1 Pitch: 12.1 mm Number of connections: 2 Number of potentials: 1
Electrical properties	Nominal current I_N: 76 A Nominal voltage U_N: 500 V Degree of pollution: 3 Rated voltage (III/3): 500 V Rated surge voltage (III/3): 6 kV
Connection data	Connection technology Connector system: HDFK 16 Nominal cross section: 16 mm² Conductor connection exterior Connection method: Screw connection with tension sleeve Connection direction of the conductor to plug-in direction: 0° Conductor cross section rigid: 0.5 mm² ... 25 mm² Conductor cross section flexible: 0.5 mm² ... 16 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.5 mm² ... 16 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.5 mm² ... 16 mm² 2 conductors with same cross section, solid: 0.5 mm² ... 6 mm² 2 conductors with same cross section, flexible: 0.5 mm² ... 6 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.5 mm² ... 6 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 6 mm² Internal cylindrical gage: B7 Stripping length: 16 mm Tightening torque: 2 Nm ... 2.3 Nm Conductor connection interior Connection method: Cable lug connection Connection direction of the conductor to plug-in direction: 0°
Material specifications	Material data - contact Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material: Cu alloy Surface characteristics: tin-plated Material data - housing Color (Housing): gray (7042) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125°C
Notes	Safety note Safety note: Ã¢¢ Only electrically qualified personnel may install and operate the product. To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering. Ã¢¢ The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. Ã¢¢ The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. Ã¢¢ To maintain the nominal voltage, align the cable lugs straight and centered, and cast the terminals on the inside. Ã¯· There is no electrical contact to the housing. Make sure that protective grounding is provided for green/yellow color variants and articles marked with PE.
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e840d33717330747ad0c7b5d4b264f71/-S204x204-FJPG Pitch: 12.1 mm Width [w]: 12 mm External dimensions Height [h1]: 40 mm Length [l1]: 32.3 mm Internal dimensions Height [h2]: 26 mm Length [l2]: 24.3 mm
Mechanical tests	Test for conductor damage and slackening Specification: IEC 60947-7-1:2009-04 Result: Test passed Pull-out test Specification: IEC 60947-7-1:2009-04 Conductor cross section/conductor type/tractive force setpoint/actual value: 0.5 mm² / solid / > 20 N 0.5 mm² / flexible / > 20 N 25 mm² / stranded / > 135 N 16 mm² / flexible / > 100 N
Electrical tests	Temperature-rise test Specification: IEC 60947-7-1:2009-04 Requirement temperature-rise test: Increase in temperature Ã¢¤45K Short-time withstand current Specification: IEC 60947-7-1:2009-04 Air clearances and creepage distances \| 1. Insulation coordination Specification: IEC 60947-7-1:2009-04 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 500 V Rated surge voltage (III/3): 6 kV minimum clearance value - non-homogenous field (III/3): 5.5 mm minimum creepage distance (III/3): 6.3 mm
Environmental and real-life conditions	Vibration test Specification: IEC 60068-2-6:2007-12 Frequency: 10 - 150 - 10 Hz Sweep speed: 1octave/min 5g (60.1Hz...150Hz) Amplitude: 0.35mm (10Hz...60.1Hz) Test duration per axis: 2.5 h Glow-wire test Specification: IEC 60695-2-11:2014-02 Temperature: 960°C Time of exposure: 30 s Ambient conditions Ambient temperature (operation): -40°C ... 100°C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport): -40°C ... 70°C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5°C ... 100°C
Packaging specifications	Type of packaging: packed in cardboard