Industrial Automation
MCC 0,5/16-ST-2,54 - PCB connector
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product line: COMBICON Connectors XS Product type: PCB connector Product family: MCC 0,5/..-ST Number of positions: 16 Pitch: 2.54 mm Number of connections: 16 Number of rows: 1 Number of potentials: 16 |
Electrical properties | Nominal current IN: 6 A Nominal voltage UN: 160 V Degree of pollution: 3 Contact resistance: 2.1 mé Rated voltage (III/3): 160 V Rated surge voltage (III/3): 2.5 kV Rated voltage (III/2): 160 V Rated surge voltage (III/2): 2.5 kV Rated voltage (II/2): 320 V Rated surge voltage (II/2): 2.5 kV |
Connection data | Connection technology Type: Standard Connector system: COMBICON FMC 0,5 Nominal cross section: 0.75 mm² Contact connection type: Socket Interlock Locking type: without Mounting flange: without Conductor connection Connection method: Crimp connection Conductor/PCB connection direction: 0° Conductor cross section flexible: 0.14 mm² ... 0.75 mm² (Maximum external diameter of the insulation 1.9mm) Conductor cross section AWG: 26 ... 18 (Maximum external diameter of the insulation 1.9mm) Stripping length: 4.1 mm ... 4.5 mm |
Material specifications | Material data - housing Color (Housing): black (9005) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125°C |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e1234e2392bde14688da8fe58a63c0c9/-S204x204-FJPG Pitch: 2.54 mm Width [w]: 41.14 mm Height [h]: 3.95 mm Length [l]: 16 mm |
Mounting | Connection method: Crimp connection |
Notes | Note on the contact: The information on the basic material and the finish properties of the crimp contacts is to be found in the E-Shop in the technical data for the respective crimp contact. Note on application: All laboratory tests are performed in combination with the crimp contacts specified as accessories. The current depends on the crimp contact and conductor cross section used. The corresponding crimp contacts are to be found in the "Accessories" tab. The crimp contacts may only be processed with approved crimping tools. |
Mechanical tests | Tensile strength of crimp connections Result: Test passed Conductor cross section/conductor type/tractive force setpoint/actual value: 0.14 mm² / flexible / > 18 N Insertion and withdrawal forces Result: Test passed No. of cycles: 100 Insertion strength per pos. approx.: 2 N Withdraw strength per pos. approx.: 3 N Resistance of inscriptions Specification: IEC 60068-2-70:1995-12 Result: Test passed Polarization and coding Specification: IEC 60512-13-5:2006-02 Result: Test passed Visual inspection Specification: IEC 60512-1-1:2002-02 Result: Test passed Dimension check Specification: IEC 60512-1-2:2002-02 Result: Test passed |
Environmental and real-life conditions | Vibration test Specification: IEC 60068-2-6:2007-12 Frequency: 10 - 500 - 10 Hz Sweep speed: 1octave/min 5g (60.1Hz...500Hz) Amplitude: 0.35mm (10Hz...60.1Hz) Test duration per axis: 2 h Durability test Specification: IEC 60512-9-1:2010-03 Impulse withstand voltage at sea level: 2.95 kV Contact resistance R1: 2.1 mé Contact resistance R2: 2.1 mé Insertion/withdrawal cycles: 100 Insulation resistance, neighboring positions: >5Mé Climatic test Specification: DIN50018:2013-05 Corrosive stress: 1.0 dm3 SO2 on 300 dm3/40°C/1 cycle Thermal stress: 105°C/168h Power-frequency withstand voltage: 1.39 kV Ambient conditions Ambient temperature (operation): -40°C ... 100°C (dependent on the derating curve) Ambient temperature (storage/transport): -40°C ... 70°C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5°C ... 100°C |
Electrical tests | Thermal test | Test group C Specification: IEC 60512-5-1:2002-02 Tested number of positions: 16 Insulation resistance Specification: IEC 60512-3-1:2002-02 Insulation resistance, neighboring positions: >5Mé Air clearances and creepage distances | Specification: IEC 60664-1:2007-04 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 160 V Rated surge voltage (III/3): 2.5 kV minimum clearance value - non-homogenous field (III/3): 1.5 mm minimum creepage distance (III/3): 2 mm Rated insulation voltage (III/2): 160 V Rated surge voltage (III/2): 2.5 kV minimum clearance value - non-homogenous field (III/2): 1.5 mm minimum creepage distance (III/2): 0.8 mm Rated insulation voltage (II/2): 320 V Rated surge voltage (II/2): 2.5 kV minimum clearance value - non-homogenous field (II/2): 1.5 mm minimum creepage distance (II/2): 1.6 mm |
Packaging specifications | Type of packaging: packed in cardboard |
ECLASS | ECLASS-11.0: 27460202 ECLASS-12.0: 27460202 ECLASS-13.0: 27460202 |
ETIM | ETIM 9.0: EC002638 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products