1038567 PHOENIX CONTACT - Technology Bsa

TC MOBILE I/O X200-4G - SMS relay

SMS relay and signaling module, European version, monitor analog and digital values via cellular network, switch relay outputs remotely, communication via SMS or cellular network data connection (e-mail transmission, app), supply voltage 10V...60VDC

Product Code: 1038567

Partner cod.: 1038567

PHOENIX CONTACT

Product properties	Product type: Signaling system Application: I/O MTTF: 674 Years (SN29500 standard, temperature25°C, operating cycle21%) 324 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 130 Years (SN29500 standard, temperature40°C, operating cycle100%)
Electrical properties	Mains type: Cellular communication Supply Supply voltage range: 10 VDC ... 60 VDC Typical current consumption: 50 mA (24VDC) Max. current consumption: 80 mA
Input data	Digital Description of the input: Digital input Number of inputs: 4 Switching threshold "0" signal in reference to U_N: Ã¢¤ 0.3 Switching threshold "1" signal in reference to U_N: Ã¢¥ 0.7 Analog Description of the input: Analog input Number of inputs: 2 Input signal: Current or voltage Resolution: 15 bit Input impedance: 600 kÃ© (Voltage inputs) 50 Ã© (Current inputs) Voltage input signal: 0 VDC ... 60 VDC Current input signal: 0 mA ... 20 mA 4 mA ... 20 mA (configurable) Precision: ± 0.1 %
Output data	Switching Output name: Relay output Number of outputs: 4 Contact switching type: N/O contact Minimum switching voltage: 100 mV Maximum switching voltage: 60 VDC 30 VAC Limiting continuous current: 6 A Switching capacity: 100 W (Power Source PS2, P_out Ã¢¤100W) Electrical service life: 30000 cycles
Connection data	Supply Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 2.5 mm² Single conductor/terminal point, rigid: 0.2 mm² ... 2.5 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible [AWG]: 24 ... 14 Stripping length: 6.5 mm Tightening torque: 0.5 Nm ... 0.6 Nm (5-7 lbs-in, screw terminal blocks)
Interfaces	Data: USB 2.0 Connection method: Mini-USB type B, 5-pos. Transmission length: Ã¢¤ 3 m (only for configuration and diagnostics) Wireless Interface description: GSM / GPRS / EDGE / LTE (FDD) Frequency range: 800 MHz (LTE B20) 1800 MHz (LTE B3) 2600 MHz (LTE B7) 900 MHz (2 W (EGSM)) 1800 MHz (1W (EGSM)) GPRS: Multislot Class33 EDGE: Multislot Class33 LTE: CAT1
Dimensions	Width: 72 mm Height: 90 mm Depth: 62 mm
Material specifications	Material: Polycarbonate
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (SMS mode only, note the derating information in the technical documentation for data connection) Ambient temperature (storage/transport): -40°C ... 85°C Altitude: 2000 m Permissible humidity (operation): 0 % ... 95 %
Approvals	CE Certificate: CE-compliant Wireless approval, Europe Note: RED 2014/53/EU UKCA Certificate: UKCA-compliant
EMC data	Electromagnetic compatibility: Conformance with RED Directive 2014/53/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV Discharge in air: ± 8 kV Indirect discharge: ± 6 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 26 MHz ... 6 GHz Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: ± 2 kV (Unshielded supply line) Signal: ± 2 kV (Shielded signal line) ± 2 kV (Analog I/O cables, unshielded) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Input: ± 0.5 kV (Symmetrical, unshielded supply line) ± 0.5 kV (Asymmetrical, unshielded supply line) Signal: ± 1 kV (Data line, asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Emitted interference Emitted radio interference in acc. with EN 55011: ClassB, area of application: Industry and residential Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
Standards and regulations	Standards/regulations: EN50360 EN50121-4
Mounting	Mounting type: DIN rail mounting