Industrial Automation
FLT-SEC-T1+T2-2IT-350/25-FM - Type1+2 special combined lightning current and surge arrester
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | General Note: Only usable in IT Systems between L-PE, if the exposed-conductive-parts (bodies) of the equipment of the low-voltage installation is connected to the earthing arrangement of the transformer substation (interconnected earthing arrangement of the HV-transformer substation with the bodies of the LV-installation. RE = RA accordance to IEC 60364-4-442/ VDE 0100-442 Fig. 44D/ Examplea). |
Product properties | IEC test classification: I + II T1 + T2 EN type: T1 + T2 IEC power supply system: IT Type: DIN rail module, two-section, divisible Product type: Arrester combination Product family: SEC Family Surge protection fault message: Optical, remote indicator contact Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Nominal frequency fN: 50 Hz (60Hz) Indicator/remote signaling Connection name: Remote fault indicator contact Switching function: Changeover contact Operating voltage: 12 VAC ... 250 VAC 125 VDC (200 mA DC) Operating current: 10 mA AC ... 1 A AC 1 ADC (30VDC) |
Connection data | Connection method: Screw terminal blocks Fork-type cable lug Screw thread: M5 Tightening torque: 4.5 Nm Stripping length: 18 mm Conductor cross section flexible: 2.5 mm² ... 35 mm² 1.5 mm² ... 16 mm² Conductor cross section rigid: 2.5 mm² ... 35 mm² Conductor cross section AWG: 13 ... 2 Remote fault indicator contact Connection method: Plug-in/screw connection via COMBICON Screw thread: M2 Tightening torque: 0.25 Nm Stripping length: 7 mm Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/18d55f760130d14ea7b4aa5caf453d3a/-S204x204-FJPG Width: 71.2 mm Height: 95.2 mm Depth: 74.5 mm Horizontal pitch: 4 Div. |
Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA6.6-FR 20% GF PBT-FR Material group: I Housing material: PA 6.6-FR 20% GF PBT-FR |
Mechanical properties | Mechanical data Open side panel: No |
Protective circuit | Mode of protection: L-PE L-L Direction of action: 2L-PE Nominal voltage UN: 240VAC (IT) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous operating voltage UC (L-PE): 350 VAC Rated load current IL: 125 A (< 55°C) Residual current IPE: ⤠0.5 mA Nominal discharge current In (8/20) õs: 25 kA Impulse discharge current (10/350)õs, charge: 12.5 As Impulse discharge current (10/350)õs, specific energy: 160 kJ/é Impulse discharge current (10/350)õs, peak value limp: 25 kA Follow current interrupt rating Ifi (L-PE): 25 kA (264 V AC) 3 kA (350 V AC) Short-circuit current rating ISCCR: 25 kA (264 VAC) 3 kA (350 V AC) Voltage protection level Up (L-L): ⤠1.5 kV (L1-L2) Voltage protection level Up (L-PE): ⤠2.8 kV (L1-PE) ⤠1.5 kV (L2-PE) Residual voltage Ures (L-L): ⤠1.5 kV (at In / L1-L2) ⤠1.2 kV (at 10 kA / L1-L2) ⤠1 kV (at 5 kA / L1-L2) ⤠0.9 kV (at 3 kA / L1-L2) Residual voltage Ures (L-PE): ⤠2.8 kV (at In / L1-PE) ⤠2.4 kV (at 10 kA / L1-PE) ⤠2 kV (at 5 kA / L1-PE) ⤠1.8 kV (at 3 kA / L1-PE) ⤠1.5 kV (at In / L2-PE) ⤠1.2 kV (at 10 kA / L2-PE) ⤠1 kV (at 5 kA / L2-PE) ⤠0.9 kV (at 3 kA / L2-PE) TOV behavior at UT (L-PE): 415 VAC (5s / withstand mode) Response time tA: ⤠25 ns Max. backup fuse with V-type through wiring: 125 A (gG) Max. backup fuse with branch wiring: 315 A (gG) |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (only when all terminal points are used) Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 25g (Half-sine / 11 ms / 3x ñX, ñY, ñZ) Vibration (operation): 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
Standards and regulations | Standards/specifications: IEC 61643-11 Note: 2011 EN 61643-11 Standards/specifications: EN61643-11 Note: 2012 |
Mounting | Mounting type: DIN rail: 35 mm |
ECLASS | ECLASS-11.0: 27130808 ECLASS-13.0: 27171204 |
ETIM | ETIM 9.0: EC001457 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products