Not available 
| Notes | Assembly note: NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. Note on application: Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Product properties | Product type: Distributor box Application: Food processing industry Number of positions: 5 Number of slots: 8 |
| Electrical properties | Max. operating voltage Umax: 30 V DC Nominal voltage UN: 24 V DC Rated current, total: 12 A Max. current carrying capacity per path: 2 A Current carrying capacity per slot: 4 A |
| Connection data | Conductor connection Sensor/actuator connection system: M12 socket Tightening torque slot sensor/actuator cable: 0.4 Nm |
| Signaling | Status display present: Yes |
| Material specifications | Material Threaded sleeve: Stainless steel 1.4404 Material Housing: Stainless steel 1.4404 Material Molding compound: PUR Seal material O-ring: FKM Contact material: CuSn6 Contact surface material: gold-plated Contact carrier material: PBT |
| Cable/line | Cable length: 20 m Connection method: Fixed connection AWG signal line: 20 AWG power supply: 17 |
| Standards and regulations | M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-101 |
