1079650 PHOENIX CONTACT - Technology Bsa

PRC ED-T 1I3/2O3-4-HR-GN - T distributor

T distributor, Range of articles: PRC 35, design: T distributor, housing material: Polycarbonate fiber reinforced, color: black, rated voltage: 400 V, rated current: 32 A, Connection method: Preassembled, Contact connection type: Input: pin / outputs: socket. Alternatively, this item can be wired. For your specific requirements, please contact your local PHOENIX CONTACT subsidiary.

Product Code: 1079650

Partner cod.: 1079650

PHOENIX CONTACT

Notes	General: Alternatively, this item can be wired. For your specific requirements, please contact your local PHOENIX CONTACT subsidiary. Safety note Safety note: Ã¢¢ WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. Ã¢¢ WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. Ã¢¢ Assembled products may not be manipulated or improperly opened. Ã¢¢ Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). Ã¢¢ When using the product in direct connection with third-party manufacturers, the user is responsible. Ã¢¢ For operating voltages > 50V AC, conductive connector housings must be grounded Ã¢¢ Ensure that the protective or functional ground has been properly connected. Ã¢¢ VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector Ã¢¢ Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product Ã¢¢ Only use tools recommended by PhoenixContact Ã¢¢ The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. Ã¢¢ Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products Ã¢¢ Operate the connector only when it is fully plugged in. Ã¢¢ Operate the connector only when it is fully plugged in and interlocked. Ã¢¢ Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. Ã¢¢ Observe the minimum bending radius of the cable. Lay the cable without twisting it. Ã¢¢ The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Mounting	Connection method: Preassembled
Product properties	Type: T distributor Product type: Power distributor Product family: PRC 35 Coding: AD Insulation characteristics Protection class: II Degree of pollution: 2
Dimensions	Width: 180 mm Height: 159 mm Length: 70 mm
Electrical properties	Nominal voltage ATD: 400 V (III/2) Rated surge voltage (III/2): 8 kV Rated current: 32 A (observe derating)
Mechanical properties	Mechanical data Insertion/withdrawal cycles: 2000 Insertion force: 70 N ±10N
Material specifications	Color: black Color of the housing part: black Flammability rating according to UL 94: V0 Seal material: TPE Contact material: Copper alloy Contact surface material: Sn Contact carrier material: PPE O-ring material: Silicon Material of locking screw: Polycarbonate, fiber-reinforced Material for screw connection: PPE Housing material: Polycarbonate fiber reinforced
Cable/line	Halogen-free: yes
Environmental and real-life conditions	Ambient conditions Degree of protection: IP66/67/69 Ambient temperature (storage/transport): -40°C ... 70°C Ambient temperature (assembly): -5°C ... 85°C