Industrial Automation
EV-T2CCS-MF-M4X10 - Repair kit
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | General: Replacement without draining the coolant The vehicle connector housing does not have to be opened in order to replace the mating face frame. Please note: At the start of the HPC500A series project, screws with a special drive were used in the mating face frame as well as on the DC power contacts. To remove these, you can obtain the corresponding tool under item no. 1577138. Since December 2020, from batch number 76401, uniform screws with 20 IPR TORX PLUSï¢ have been used. In addition, when you purchase a repair set from PhoenixContact, you will always receive screws with the new IPR TORX PLUSï¢ drive. |
Product properties | Product type: Repair kit Product family: CHARX connect Application: for replacement of the mating face frame of vehicle charging connectors Type: Accessories Design: with replaceable mating face frame with 5x M4X10 flat-head screws with Torx safety drive (IPRTORXPLUSï¢) Charging standard: HPC CCS type2 Charging mode: Mode 4 |
Material specifications | Color (Housing): black (9005) |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -30°C ... 50°C Ambient temperature (storage/transport): -40°C ... 80°C |
Standards and regulations | Standards Standards/regulations: IEC 62196-3-1 |
ECLASS | ECLASS-11.0: 27144792 ECLASS-12.0: 27144792 ECLASS-13.0: 27144792 |
ETIM | ETIM 9.0: EC002884 |
UNSPSC | UNSPSC 21.0: 39121500 |