Industrial Automation
SAC-6P-DTMS-5P-M12FS - Adapter
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | General: Sufficient strain relief at the connection point can prevent premature stress and wear. Utilize tie down accessories to eliminate bending and dynamic loads on the connector. |
Product properties | Product type: M8/M12 adapters Number of positions: 5 Coding: A Insulation characteristics Overvoltage category: II Degree of pollution: 3 |
Electrical properties | Nominal voltage UN: 48 VAC 60 VDC Nominal current IN: 4 A |
Material specifications | Flammability rating according to UL 94: V0 Seal material: Viton Material of grip body: GF nylon Contact material: CuSn Contact surface material: Ni/Au M12, Ni/Sn DT Contact carrier material: GF nylon Material for screw connection: Nickel-plated brass |
Connector | Connection 1 Type: Plug straight DEUTSCH DT04-6P Number of positions: 5 Connection 2 Type: Socket straight M12 Number of positions: 5 Coding type: A |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: ⥠100 |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP67 IP69K Ambient temperature (operation): -40°C ... 105°C |
Approvals | National Marine Electronics Association Certificate: approved |
Standards and regulations | Standard designation: M12 connector Standards/specifications: IEC 61076-2-101 SAE J2030 |
ECLASS | ECLASS-11.0: 27440106 ECLASS-12.0: 27440106 ECLASS-13.0: 27440106 |
ETIM | ETIM 8.0: EC002925 |
UNSPSC | UNSPSC 21.0: 31251500 |
Description other products