Industrial Automation
FL SWITCH 2516 PN - Industrial Ethernet Switch


Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8dfc49ef1b25574c887cc689a6c0cae7/-S204x204-FJPG Width: 214 mm Height: 113 mm Depth: 67 mm |
Notes | General: Support by phone or on-site (fee is charged) |
Material specifications | Material base plate: Die-cast aluminum, corrosion-resistant Housing material: Stainless steel 1.4301 |
Mounting | Mounting type: DIN rail mounting |
Interfaces | Ethernet (RJ45) Connection method: RJ45 Note on the connection method: Auto negotiation and autocrossing Transmission speed: 10/100/1000 Mbps Transmission physics: Copper Transmission length: 100 m (per segment) Signal LEDs: Data receive, link status No. of channels: 16 (RJ45 ports) |
Product properties | Type: Block design Product type: Switch Product family: Managed Switch 2000 MTTF: 238.46 Years (SNÃ29500 standard, temperatureÃ25°C, operating cycleÃ21%) 137.07 Years (SNÃ29500 standard, temperatureÃ40°C, operating cycleÃ34.25%) 21.04 Years (SNÃ29500 standard, temperatureÃ70°C, operating cycleÃ100%) Special properties: Extended temperature range PROFINET mode preset, PROFINET status LEDs Signal delay: ââ°¥ 1.9 õs (Store-and-Forward mode, 10/100/1000ÃMbps, depending on the frame size) Insulation characteristics Protection class: III (VDEÃ0106) Degree of pollution: 2 Switch functions Diagnostic functions: RMON History LLDP (Link Layer Discovery Protocol) SNMP-Traps N:1-Portmirroring ACD (Address Conflict Detection) SysLog CRC-Surveillance Basic functions: Store-and-forward switch, complies with IEEEÃ802.3 Signal contact control voltage: typ. 24 VÃDC PROFINET conformance class: Conformance-Class B PROFINET device function: PROFINET device Fast Startup Filter functions: Quality of Service (8 priority classes) Class of Service DiffServ/DSCP Port-Priorisierung VLAN (up to 32 VLANs) IGMP Snooping/Querier (v1/v2) Auto-Query-Port Extended Multicast Filtering IP parameterization: DHCP-Client DHCP Option 82 (Relay Agent) DHCP server (pool-based, port-based) BootP DCP (Discovery and Configuration Protocol) MAC address table: 8k Management: Web-based management (HTTP/HTTPS) Role-based user management (LDAP, RADIUS) SNMPv1/v2/v3 Command Line Interface (Telnet, SSH) Redundancy: MRP (Media Redundancy Protocol) RSTP (Rapid Spanning Tree Protocol) FRD (Fast Ring Detection) Large Tree Support LACP (Link Aggregation Control Protocol) PROFINET S2 system redundancy Status and diagnostic indicators: LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (link/activity and speed), PROFINET status LEDs (BF, SF) Additional functions: Jumbo frames (max. 9,600Ãbytes) Transmission of MMSÃandÃGOOSE (IEC 61850-8-1) Transmission of Modbus/TCP Time synchronization: SNTP (Simple Network Time Protocol) Security functions Port security: MAC-based, RADIUS (IEEE 802.1X), MAC Authentication Bypass Basic functions: Store-and-forward switch, complies with IEEEÃ802.3 |
Electrical properties | Local diagnostics: US1/2 Supply voltage US1, US2 Green LED FAIL Div. LED red LNK/ACT Link status Green LED SPD Data transmission speed Green/orange LED BF Bus errors LED red SF Group error LED red Maximum power dissipation for nominal condition: 11.26 W (US = max, Tamb = max) Test voltage: 500 VÃDC Test section: for one minute 500 VÃDC Transmission medium: Copper Supply Supply voltage (DC): 24 VÃDC (redundant) Supply voltage range: 19.2 VÃDC ... 32 VÃDC Power supply connection: Via COMBICON, max. conductor cross section 2.5 mm² Residual ripple: 3.6 VPP (within the permitted voltage range) Max. current consumption: 610 mA (US = min, Tamb = max) Typical current consumption: 440 mA (at US = 24ÃVÃDC and 25ðC ambient temperature) Function Signal contact control voltage: typ. 24 VÃDC |
Connection data | Connection method: Push-in spring connection Note on the connection method: Use only copper connecting cables providing the permitted temperature range (-40ðC ... 75ðC). Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 10 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing) Shock (operation): 30g (ENÃ60068-2-27) Vibration (operation): in acc. with IEC 60068-2-6: 5g, 150 Hz Air pressure (operation): 79 kPa ... 108 kPa up to 2000Ãm above mean sea level (Without derating) Air pressure (storage/transport): 79 kPa ... 108 kPa up to 2000Ãm above mean sea level (Without derating) |
Standards and regulations | Free from substances that could impair the application of coating: Yes |
Approvals | UL, USA/Canada Identification: cULus Corrosive gas test Identification: ISA S71.04.2013 G3 Harsh Group A DNV GL data Temperature: B Humidity: B Vibration: A EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board |
EMC data | Conformance with EMC directives: EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A EN 61000-6-2 EN 61000-4-5 (surge) Criterion A EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A EN 61000-6-2 EN 61000-6-4 (interference) ClassÃA EN 61000-6-2 EN 61000-6-4 (conducted interference) ClassÃA Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 61000-6-4 |
System properties | Functionality Basic functions: Store-and-forward switch, complies with IEEEÃ802.3 |
Signaling | Status display: LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (link/activity and speed), PROFINET status LEDs (BF, SF) |
Description other products