1089345 PHOENIX CONTACT - Technology Bsa

FLKM 2X14-PA/25/S7-1500 - Front adapter

VARIOFACE front adapter, for SIMATIC^® S7-1500 digital 25mm modules, 2 x 8 channels can be connected. The front adapters are plugged into the front connectors on the I/O modules, and once plugged in they can can no longer be separated.

Product Code: 1089345

Partner cod.: 1089345

PHOENIX CONTACT

Product properties	Product type: Front adapter Product family: VARIOFACE Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2
Electrical properties	Operating voltage (DC): Ã¢¤ 60 VDC Nominal operating mode: 100% operating factor Current (per branch): Ã¢¤ 1 A Current (per byte): Ã¢¤ 2 A Air clearances and creepage distances Rated insulation voltage: 63 V Rated surge voltage: 0.6 kV (1.2/50 Ã¼s) Supported controller SIEMENS S7-1500 Suitable I/O card: 6ES7521-1BH10-0AA0 6ES7522-1BH10-0AA0
Connection data	Connection1 (control level) Connection method: Plug-in connection Number of connections: 1 Number of positions: 24 Connection2 (field level) Connection in acc. with standard: IEC 60603-13 Connection method: IDC/FLK pin strip Number of connections: 2 Number of positions: 14 Insertion/withdrawal cycles: > 50 Pitch: 2.54 mm
Dimensions	Item dimensions Width: 13 mm Height: 118.56 mm Depth: 27.75 mm
Environmental and real-life conditions	Ambient conditions Degree of protection (Module): IP20 Degree of protection (Installation location): Ã¢¥ IP54 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -20°C ... 70°C Altitude: Ã¢¤ 2000 m
Approvals	UL, USA/Canada Identification: UL508 Recognized
Standards and regulations	Air clearances and creepage distances Standards/regulations: ENIEC 60664-1
Mounting	Mounting type: Plug-in mounting Mounting position: any
Notes	General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.