Industrial Automation
Product properties | Product type: DC charging cable Product family: CHARX connect standard Application: for charging electric vehicles (EV) with direct current (DC) for installation at charging stations for electromobility (EVSE) Type: DC charging cable with vehicle charging connector and open cable end Design: with connected PP contact with replaceable mating face frame with analog temperature sensors Technology: Combined Charging System Affixed logo: PHOENIXCONTACT logo Label: 14.1 mm x 44.8 mm (customer logo on request) Charging standard: CCS type2 Charging mode: Mode 4 |
Electrical properties | Type of signal transmission: Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 Note on the connection method: Crimp connection, cannot be disconnected Coding: 1500é (between PE and PP) PP signal contact connected to cable Temperature monitoring: 2x Pt 1000 Type of charging current: DC Charging power: 80 kW Charging current: 80 A Power contact Number: 3 (PE, DC+, DC-) Rated voltage: 1000 VDC Rated current: 80 A (up to 40°C) Signal contact Number: 2 (CP, PP) Rated voltage: 30 VAC Rated current: 2 A Temperature sensors (Pt1000) Sensor type: Pt 1000 Standards/regulations: DINEN60751 Attachment point: Sensor for the DC contacts Switch-off temperature: 90°C ±1K (equivalent to a Pt 1000 value of 1346.5 é) Long-term stability: 0.06 % (after 1000hours at 130°C) Recommended measured current: 1 mA (1 V at 0°C) Coefficient: 3850ppm/K Ambient temperature: -50°C ... 130°C (Operation) |
Dimensions | Vehicle charging connector Width: 75 mm Height: 139 mm Depth: 267 mm |
Material specifications | Color (Housing): black (9005) Color (Handle area): gray (7042) Color (Mating face): black (9005) Color (Protective cap): black (9005) Color (Cable): black (9005) Material (Vehicle charging connector): Plastic Material (Cable outer sheath): TPE-U Material (Contact surface): Silver Flammability rating according to UL 94: V0 (Mating face) |
Cable/line | Cable length: 5 m ±45mm Wiring standards/regulations: prEN50620/DINEN50620 Cable weight: max. 820 kg/km Cable type: Class 6 straight Cable structure: 3x16mm² + 3x2x0.75mm² External cable diameter: 21.2 mm ±0.4mm Outer sheath, material: TPE-U Stripping length of the sheath: 140 mm ±10mm Cable resistance: ⤠0.00121 é/m (based on a power core, at an ambient temperature of 20°C) Bending radius: min. 212 mm (10x diameter) |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: > 10000 Insertion force: < 100 N Withdrawal force: < 100 N |
Environmental and real-life conditions | Ambient conditions Degree of protection (Vehicle charging connector): IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) Ambient temperature (operation): -30°C ... 40°C max. 55°C (Current reduction required, observe the DC contact temperature limit value of90°C) Ambient temperature (storage/transport): -40°C ... 80°C Altitude: 5000 m (above sea level) |
Standards and regulations | Standards Standards/regulations: IEC 62196-3 |
ECLASS | ECLASS-11.0: 27144705 ECLASS-12.0: 27144705 ECLASS-13.0: 27144705 |
ETIM | ETIM 9.0: EC002897 |
UNSPSC | UNSPSC 21.0: 39121500 |