Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 1099551
PHOENIX CONTACTNot available

VAL-MS 1000DC-PV/2+V/40 - Type 2 surge arrester

Surge protective device for 2-pos. isolated and grounded 1,000VDC PV systems, for DIN rail mounting, 3-pos. base element, three pluggable temperature-monitored protective elements, status message on each plug.
Product Code: 1099551
Partner cod.: 1099551
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
NotesGeneral
Note: The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.
Product propertiesIEC test classification: PV II
PV T2
EN type: T2
IEC power supply system: DC
Type: DIN rail module, two-section, divisible
Distance between live and grounded parts: 8 mm
Product type: PV arrester
Product family: VALVETRAB MS
Installation location: Interior
Installation location of the disconnect device: Internal
Accessibility: Accessible
Connection configuration: Y configuration
SPD failure behavior: OCFM (Open-Circuit Failure Mode)
Surge protection fault message: optical
Insulation characteristics
Overvoltage category: III
Pollution degree: 2
Connection dataConnection method: Screw connection
Fork-type cable lug
Screw thread: M5
Tightening torque: 3 Nm (1.5mm² ... 16mm²)
4.5 Nm (25mm²...35mm²)
Stripping length: 16 mm
Conductor cross section flexible: 1.5 mm² ... 25 mm²
1.5 mm² ... 16 mm²
Conductor cross section rigid: 1.5 mm² ... 35 mm²
Conductor cross section AWG: 15 ... 2
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/631afe2fd0194a4b9f6abb19695c1c2d/-S204x204-FJPG
Width: 53.4 mm
Height: 89.8 mm
Depth: 65.7 mm (incl. DIN rail 7.5mm)
Horizontal pitch: 3 Div.
Material specificationsFlammability rating according to UL 94: V-0
CTI value of material: 600
Insulating material: PA 6.6-FR
PBT-FR
Material group: I
Housing material: PA 6.6-FR
PBT-FR
Mechanical propertiesMechanical data
Open side panel: No
Protective circuitMode of protection: (L+) - (L-)
(L+) - PE
(L-) - PE
Direction of action: (L+)-PE & (L-)-PE & (L+)-(L-)
Rated load current IL: 80 A
Residual current IPE: ≤ 20 µA DC
≤ 250 µA AC
Standby power consumption PC: ≤ 25 mVA
Nominal discharge current In (8/20) µs: 15 kA
Maximum discharge current Imax (8/20) µs: 40 kA
Total discharge current Itotal (8/20)µs: 40 kA
Voltage protection level Up: ≤ 3.7 kV
Residual voltage Ures: ≤ 3.7 kV (at In)
≤ 3.1 kV (at 5 kA)
≤ 3.5 kV (at 10 kA)
≤ 4 kV (at 20 kA)
≤ 4.6 kV (at 30 kA)
≤ 5 kV (at 40 kA)
Response time tA: ≤ 25 ns
PV protective circuit
Connection configuration: Y configuration
SPD failure behavior: OCFM (Open-Circuit Failure Mode)
Protective circuit DC voltage side (DC)
Open circuit voltage UOCSTC: ≤ 975 VDC
Maximum discharge current Imax (8/20) µs: 40 kA
Response time tA: ≤ 25 ns
Total discharge current Itotal (8/20)µs: 40 kA
Insulation resistance Riso: > 5 GΩ (at 500 V DC)
Nominal discharge current In (8/20) µs: 15 kA
Rated load current IL: 80 A
Continuous operating current ICPV: < 20 µA
Maximum continuous operating voltage UCPV: 1170 VDC
Short-circuit current rating ISCPV: 2000 A
Residual voltage Ures: ≤ 3.7 kV (at In)
≤ 3.1 kV (at 5 kA)
≤ 3.5 kV (at 10 kA)
≤ 4 kV (at 20 kA)
≤ 4.6 kV (at 30 kA)
≤ 5 kV (at 40 kA)
Residual current IPE: ≤ 20 µA DC
≤ 250 µA AC
Voltage protection level Up: ≤ 3.7 kV
Standby power consumption PC: ≤ 25 mVA
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20 (only when all terminal points are used)
Ambient temperature (operation): -40°C ... 80°C
Ambient temperature (storage/transport): -40°C ... 80°C
Altitude: ≤ 2000 m (amsl)
Permissible humidity (operation): 5 % ... 95 %
Shock (operation): 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation): 7.5g (5-500 Hz/2.5 h/XYZ)
ApprovalsUL specifications
Maximum continuous operating voltage MCOV: 1170 VDC
Short-circuit current rating (SCCR): 50 kA
Voltage protection rating VPR: 3 kV
Nominal discharge current In: 10 kA
Mode of protection: (L+) - (L-)
(L+) - G
(L-) - G
Nominal voltage: 1170 VDC
Power distribution system: DCPV
SPD Type: 1CA
UL connection data
Tightening torque: 30 lbf-in.
Conductor cross section AWG: 14 ... 2
Standards and regulationsStandards/specifications: EN61643-31
IEC 61643-31
Note: 2019
2018
MountingMounting type: DIN rail: 35 mm
Technical Specs
ECLASSECLASS-11.0: 27130805
ECLASS-13.0: 27171402
ETIMETIM 9.0: EC000941
UNSPSCUNSPSC 21.0: 39121620
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00979.pdf

Flyer_00002.pdf

Flyer_00001.pdf

Technical_drawing_08426.pdf