Industrial Automation
FLKM 20-PA-ET200SP - Front adapter
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Front adapter Product family: VARIOFACE Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2 |
Electrical properties | Operating voltage (DC): ⤠60 VDC Nominal operating mode: 100% operating factor Current (per branch): ⤠1 A Current (Voltage supply via IDC/FLK): ⤠2 A Current (Voltage supply via Push-in connection): ⤠8 A Air clearances and creepage distances Rated insulation voltage: 63 V Rated surge voltage: 0.6 kV (1.2/50 üs) Supported controller SIEMENS ET 200SP Suitable base unit: 6ES7193-6BP00-0BA0 6ES7193-6BP00-2BA0 6ES7193-6BP00-0BA1 6ES7193-6BP00-0DA0 6ES7193-6BP00-2DA0 6ES7193-6BP00-0DA1 Suitable I/O module: 6ES7131-6BH01-0BA0 (Base Units A0/A1) 6ES7131-6BH01-2BA0 (Base Units A0/A1) 6ES7132-6BH01-0BA0 (Base Units A0/A1) 6ES7132-6BH01-2BA0 (Base Units A0/A1) 6ES7134-6GD01-0BA1 (Base Units A0/A1) 6ES7134-6GD01-2BA1 (Base Units A0/A1) 6ES7134-6HD01-0BA1 (Base Units A0/A1) 6ES7134-6HD01-2BA1 (Base Units A0/A1) 6ES7134-6TD00-0CA1 (Base Units A0/A1) 6ES7134-6JD00-0CA1 (Base Units A0/A1) 6ES7134-6JD00-2CA1 (Base Units A0/A1) 6ES7134-6FF00-0AA1 (Base Units A0/A1) 6ES7134-6GF00-0AA1 (Base Units A0/A1) 6ES7134-6JF00-0CA1 (Base Units A0/A1) 6ES7134-6JF00-2CA1 (Base Units A0/A1) 6ES7134-6FB00-0BA1 (Base Units A0/A1) 6ES7134-6GB00-0BA1 (Base Units A0/A1) 6ES7134-6HB00-0CA1 (Base Units A0/A1) 6ES7134-6HB00-0DA1 (Base Units A0/A1) 6ES7135-6FB00-0BA1 (Base Units A0/A1) 6ES7135-6GB00-0BA1 (Base Units A0/A1) 6ES7135-6HB00-0CA1 (Base Units A0/A1) 6ES7135-6HB00-0DA1 (Base Units A0/A1) 6ES7135-6HD00-0BA1 (Base Units A0/A1) |
Connection data | Connection1 (control level) Connection method: Plug-in connection Number of connections: 1 Number of positions: 18 Connection2 (field level) Connection in acc. with standard: IEC 60603-13 Connection method: IDC/FLK pin strip Number of connections: 1 Number of positions: 20 Insertion/withdrawal cycles: > 50 Pitch: 2.54 mm Connection3 (supply) Connection method: Push-in spring connection Number of connections: 1 Number of positions: 2 Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 26 ... 16 Pitch: 3.81 mm |
Dimensions | Item dimensions Width: 14.9 mm Height: 52.95 mm Depth: 48.99 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection (Module): IP00 Degree of protection (Installation location): ⥠IP54 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -20°C ... 70°C Altitude: ⤠2000 m |
Approvals | UL, USA/Canada Identification: UL508 Recognized |
Standards and regulations | Air clearances and creepage distances Standards/regulations: ENIEC 60664-1 |
Mounting | Mounting type: Plug-in mounting Mounting position: any |
Notes | General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. Once plugged in, the front adapter and terminal block form a single unit that can no longer be separated. |
ECLASS | ECLASS-11.0: 27242292 ECLASS-13.0: 27242292 ECLASS-12.0: 27242292 |
ETIM | ETIM 9.0: EC002584 |
UNSPSC | UNSPSC 21.0: 32151600 |
Description other products