Industrial Automation
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/ab419bb85e68fb40ba4ed3087f47c4d9/-S204x204-FJPG Width: 14.9 mm Height: 62.2 mm Depth: 62 mm |
Interfaces | SmartElement interface Number of interfaces: 1 Connection method: Card edge connector Transmission speed: See system in which you use the SmartElement. Start time until ready to operate: < 500 ms |
System properties | Module ID code (hex): none Process data channel: 8 bit Input address area: 0 Byte Output address area: 1 Byte Required parameter data: 9 Byte Required configuration data: 6 Byte |
Output data | Relay Number of outputs: 2 (floating) Connection method: Push-in connection Connection technology: 2-conductor Contact switching type: Changeover contact Switching current: max. 6 A (up to 250VAC, cos phi = 0.75 ... 0.8) max. 6 A (up to 30VDC, N/O contact, general use) max. 3 A (up to 30VDC, N/C contact, general use) max. 580 mA (at 48 V DC) max. 250 mA (at 110 V DC) max. 125 mA (at 220 V DC) max. 220 mA DC (125VDC, L/R â¤50ms) max. 110 mA DC (250VDC, L/R â¤50ms) Switching capacity: max. 1500 VA (AC applications up to55°C, observe derating above that) max. 180 W (up to 30VDC, N/O contact, general use) max. 90 W (up to 30VDC, N/C contact, general use) max. 28 W (above 30VDC) For further DC values, see DC load limit curve. Switching capacity in accordance with IEC 60947-5-1: 3 A (24V (AC15)) 3 A (120V (AC15)) 3 A (230 V (AC15)) 2 A (24V (DC13), L/R=100ms) 0.2 A (110V(DC13), L/R=44ms) 0.1 A (220V (DC13), L/R=44ms) Switching capacity in accordance with UL/CSA61010-2-201: 5 A (AC, B300, up to max.55°C) 1 A (DC, R300, up to max.60°C) Switching frequency: max. 6 (per minute) Mechanical service life: 20x 106 cycles |
Product properties | Type: modular Product type: I/O component Product family: Axioline SmartElements Mounting position: See the system in which the SmartElement is used. Insulation characteristics Overvoltage category: III (EN 61010-2-201/IEC 61010-2-201) Pollution degree: 2 (IEC 60664-1, EN60664-1) |
Electrical properties | Potentials: Communications power supply of the Smart Elements (U Supply voltage: using card edge connectors Potentials: I/O supply (U Supply voltage: 24 VDC (using card edge connectors) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: typ. 36 mA (18mA per relay, all contacts floating) Protective circuit: Surge protection; See the system in which the SmartElement is used. Reverse polarity protection; parallel diode Electrical isolation/isolation of the voltage ranges Test voltage: Communications supply / 24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: Communications supply / functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: Supply logic / relay contact: 4 kV Test voltage: 24V supply (devices) / relay contact: 4 kV Test voltage: Relay contact / functional ground: 4 kV |
Connection data | Connection technology Connection name: I/O Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineSmartElementsâ user manual. When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.25 mm² ... 1.5 mm² Conductor cross section flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 0.75 mm² Stripping length: 8 mm I/O Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineSmartElementsâ user manual. When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL. Conductor cross section, rigid: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 0.75 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 80 kPa ... 106 kPa Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
Mounting | Mounting type: Smart Element slot Mounting position: See the system in which the SmartElement is used. |
ECLASS | ECLASS-11.0: 27242604 ECLASS-12.0: 27242604 ECLASS-13.0: 27242604 |
ETIM | ETIM 9.0: EC001599 |
UNSPSC | UNSPSC 21.0: 32151600 |