Not available 
| Product properties | Product type: Temperature transmitter Product family: Field Analog No. of channels: 1 Configuration: Software HART Insulation characteristics Overvoltage category: II Pollution degree: 2 |
| Electrical properties | No. of channels: 1 Step response (0â99%): 1 s (TC) 1 s (RTD) Electrical isolation Input/output Test voltage: 2 kV AC (50Hz, 60s) Supply Supply voltage range: loop-powered, no external supply necessary 10 VDC ... 36 VDC (Standard) |
| Input data | Measurement Number of inputs: 1 Input voltage range: -20 mV ... 100 mV (Minimum measuring span: 5mV) Sensor types (RTD) that can be used: Pt, Ni, Cu sensors: 2, 3, 4-wire Sensor types that can be used (TC): A, B, C, D, E, J, K, L, N, R, S, T, U Temperature measuring range: -250°C ... 2500°C (Range depending on the sensor type) ⥠10 K (RTD) ⥠50 K (TC) Linear resistance measuring range: 10 é ... 2000 é (Minimum measuring span: 10é) |
| Output data | Signal: Current Current output signal: 4 mA ... 20 mA (HART) 20 mA ... 4 mA (HART) Max. current output signal: 23 mA Load: (UL - 10V) / 0.023A HART coding: FSK ± 0.5mA HART version: 7 Transmission speed: 1200 Baud Mains frequency filter: 50/60 Hz Communication resistance: ⥠250 é Switch-on delay: ï» 7 s (HART) ï» 7 s (Measured value) |
| Connection data | Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm |
| Ex data | Ex installation (EPL): Gc Div.2 |
| Interfaces | Data communication (bypass) Protocols supported: HART |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP00 (upon installation in field housing IP66/67, NEMA 4X) Ambient temperature (operation): -40°C ... 85°C Ambient temperature (storage/transport): -50°C ... 100°C Altitude: ⤠4000 m (Above sea level) Climatic class: C1 Permissible humidity (operation): 5 % ... 95 % (condensation permitted) |
| Approvals | CE Certificate: CE-compliant ATEX Identification: ï II 3 G Ex ec IIC T6 Certificate: PxCIF20ATEX1145192U CSA Identification: Ex ec IIC T6...T4 |
| Mounting | Mounting type: Installation DIN rail mounting Assembly instructions: Installation in connecting head B in accordance with DINEN50446 |
| ECLASS | ECLASS-11.0: 27210129 ECLASS-12.0: 27210129 ECLASS-13.0: 27210129 |
| ETIM | ETIM 9.0: EC002919 |
| UNSPSC | UNSPSC 21.0: 41112100 |
Description other products
