1163099 PHOENIX CONTACT - Technology Bsa

SACC-DSI-M12FSL4FE-M16XL/0,5GR - Device connector, rear mounting

Device connector, rear mounting, Power, 5-position, Socket, M12, coding: L, on free cable end, Rear mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 2.50 mm², PEX litz wire, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1238575

Product Code: 1163099

Partner cod.: 1163099

PHOENIX CONTACT

Notes	General: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. FE not connected to metal parts that can be touched, no protective function Lock nut is included in the scope of delivery
Mounting	Mounting type: Rear mounting M16 x 1.5 Tightening limitation Assembly instructions: Tightening limitation Connection method: Individual wires
Product properties	Product type: Circular connectors (device side) Sensor type: Power Number of positions: 5 No. of cable outlets: 1 Shielded: no Coding: L Thread type: M12 Insulation characteristics Overvoltage category: III Degree of pollution: 3
Material specifications	Flammability rating according to UL 94: V0 Seal material: FKM Contact material: CuZn Contact surface material: Au Contact carrier material: PA Material for screw connection: Zinc die-cast, nickel-plated Conductor material: Tin-plated Cu litz wires
Electrical properties	Rated surge voltage: 1.5 kV Nominal voltage U_N: 63 VDC Nominal current I_N: 16 A Test voltage: 1.5 kV
Connection data	Conductor connection Connection method: Individual wires Contact connection type: Socket Conductor cross section: 2.5 mm²
Mechanical properties	Mechanical data Insertion/withdrawal cycles: > 100
Connector	Connection 1 Head design: Socket Head thread type: M12 Coding: L Connection 2 Head design: free cable end
Cable/line	Cable length: 0.5 m Cable type: PEX litz wire Signal type/category: Power Single wire, color: brown 1, white 2, blue 3, black 4, gray FE Cable cross section: 2.5 mm² Conductor material: Tin-plated Cu litz wires AWG signal line: 14 Halogen-free: according to IEC 60754-1 Flame resistance: in acc. with UL FT-2 Ambient temperature (operation): -40°C ... 85°C (without mechanical actuation) -25°C ... 105°C (Cable, flexible installation)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP67 IP65/IP67 Ambient temperature (operation): -25°C ... 85°C (Plug / socket) -40°C ... 85°C (without mechanical actuation) -25°C ... 105°C (Cable, flexible installation) -40°C ... 105°C (cable, fixed installation)
Standards and regulations	Flame resistance: in acc. with UL FT-2 M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-111 Note: In line with