Not available 
| Product properties | Product type: Inductive coupler Application: Ethernet Power MTTF: 115 Years (SN29500 standard, temperature25°C, operating cycle21%) 60 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 27 Years (SN29500 standard, temperature40°C, operating cycle100%) Insulation characteristics Overvoltage category: II Pollution degree: 1 |
| Electrical properties | Maximum power dissipation for nominal condition: 4.08 W Supply Supply voltage range: 19 VDC ... 30 VDC Typical current consumption: 170 mA (without remote coupler, at 24VDC, at25°C) 480 mA (with remote coupler, without load, at 24VDC, at25°C) Max. current consumption: ⤠3.6 A (with remote coupler, 2Aload, input voltage of 19VDC) Inrush current: ⤠0.8 A (8ms at 24VDC, without remote coupler) ⤠4.5 A (6ms at 24VDC, with remote coupler, without load) Protective circuit: Transient protection, polarity protection |
| Input data | Digital Description of the input: Digital input Number of inputs: 1 Voltage input signal: 19 VDC ... 30 VDC Switching level "1" signal: 19 VDC ... 30 VDC |
| Output data | Signal Output name: Digital output Number of outputs: 1 Voltage output signal: 24 VDC |
| Connection data | Supply Connection method: M12 connector (A-coded) |
| Interfaces | Data: Ethernet interface, 100Base-T(X) in accordance with IEEE802.3 Transmission speed: 100 Mbps Connection method: M12 female, D-coded No. of channels: 1 Transmission length: 100 m (shielded twisted pair) Transmission medium: Copper Inductive: Power transmission Switch-on time: < 450 ms (ETH Full Duplex operating mode) Range: min. 0 mm typ. 10 mm (at55°C) typ. 12 mm (at 25°C) Frequency range: 100 kHz ... 148.5 kHz (Power transmission) Test field strength: ~ 1.95 µA/m (within 10m distance) Wireless Wireless modules that can be connected: 1 (Remote coupler) Frequency: 60 GHz Frequency range: 57 GHz ... 64 GHz (Data transmission) Transmission power: < 10 mW (EIRP) |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d36c7f3f40c2e14cb6c5418cfc6d323f/-S204x204-FJPG Width: 80 mm Height: 86 mm Depth: 39 mm |
| Material specifications | Material: Plastic Die-cast zinc Flammability rating according to UL 94: V0 Impact strength: IK06 |
| Cable/line | Other resistance: Resistant to welding splashes |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP65 Impact strength: IK06 Ambient temperature (operation): -20°C ... 55°C (observe derating) Ambient temperature (storage/transport): -40°C ... 85°C Altitude: 2000 m Permissible humidity (operation): 10 % ... 95 % Permissible humidity (storage/transport): 10 % ... 95 % Air pressure (operation): 80 kPa ... 108 kPa (up to 2000m above sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (up to 3500m above sea level) |
| Approvals | CE Certificate: CE-compliant Wireless approval, Europe Note: RED 2014/53/EU Wireless approval Japan, MIC Identification: 006-001058 KC approval for South Korea Certificate: R-R-PCK-1234232 |
| EMC data | Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Conducted noise emission: EN55032 Class A, industrial applications Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: ± 4 kV (Test Level 2) Discharge in air: ± 8 kV (Test Level 3) Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 1 GHz (Test Level 3) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: ± 2 kV (Test Level 3 - asymmetrical) Output: ± 2 kV (Test Level 3 - asymmetrical) Signal: ± 2 kV (Test Level 3 - asymmetrical) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)â Input: ± 0.5 kV (Test Level 1 - symmetrical) ± 1 kV (Test Level 2 - asymmetrical) Output: ± 1 kV (Test Level 2 - asymmetrical) Signal: ± 1 kV (Test Level 2 - asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ Frequency range: 0.15 MHz ... 80 MHz (Test Level 3 - asymmetrical) Comments: Criterion A Voltage: 10 V (80%amplitude modulation with 1kHz) Emitted interference Standards/regulations: EN55016-2-3 Comments: Class A, industrial applications Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
| Standards and regulations | Free from substances that could impair the application of coating: Yes Other resistance: Resistant to welding splashes Standards/regulations: EN60204-1 (PELV) Standard designation: Protective extra-low voltage |
| Mounting | Mounting type: Wall mounting Assembly instructions: Observe derating Mounting position: any |
| ECLASS | ECLASS-11.0: 27040701 ECLASS-12.0: 27040701 ECLASS-13.0: 27040701 |
| ETIM | ETIM 9.0: EC002540 |
| UNSPSC | UNSPSC 21.0: 39121000 |
Description other products
