1260009 PHOENIX CONTACT - Technology Bsa

SACB-C-H180 8/16 SCO GN - Connector hood

Connector hood with integrated connector with screw connection, for sensor/actuator boxes with M12 metal thread or QUICKON connection and master cable connection, for 4, 6, or 8slots

Product Code: 1260009

Partner cod.: 1260009

PHOENIX CONTACT

Notes	General: For details about the PCB connectors used, refer to the technical data for MC 1,5/10-STF-3,5 (1847204) NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties.
Product properties	Product type: Connector hood Application: Sensor/actuator box
Electrical properties	Nominal voltage U_N: 120 VAC 120 VDC Rated current, total: 10 A Max. current carrying capacity per path: 2 A Current carrying capacity per slot: 4 A
Signaling	Status display present: No
Dimensions	Width: 58 mm Height: 21 mm Length: 34 mm
Material specifications	Material: PBT Flammability rating according to UL 94: V0 Seal material: NBR Material of contact, master cable side: CU alloy Material of the contact carrier on the master cable side: PA Material of contact surface, master cable side: gold-plated
Cable/line	Sensor/actuator connection system: M12-SPEEDCON-socket Connection method: Pluggable screw connection External cable diameter: 7 mm ... 12 mm Stripping length (signal): 7 mm Stripping length for sheath: 50 mm (Master cable) Tightening torque, cover screw: 0.35 Nm Tightening torque, union nut: 2.5 Nm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 IP67 IP69K Ambient temperature (operation): -30°C ... 80°C