| Dimensions | Width: 45 mm
Height: 130 mm
Depth: 133.8 mm
|
| Notes | Note on application
Note on application: Only for industrial use
|
| Material specifications | Color: gray
Housing material: Plastic
|
| Interfaces | Ethernet
Connection method: RJ45
Transmission speed: 10/100/1000 Mbps
Transmission physics: Ethernet in RJ45 twisted pair
Transmission length: 100 m (per segment)
Signal LEDs: Supply voltage, data transmission, error, link, activity
No. of channels: 2 (RJ45 ports)
2x digital output, 2x digital input
Connection method: Push-in-/Spring-cage connection
Additional text: not electrically isolated
VPN - release button
Connection method: Push-in-/Spring-cage connection
|
| System properties | Functionality
Basic functions: Security appliance with intelligent firewall and VPN for 250 tunnels, plastic housing, slot for SD memory card, extended temperature range, Gigabit wire speed
System requirements
Supported browsers: HTTPS support required
|
| Product properties | Product type: Security router for the DIN rail
Product family: Security-Router
Type: Stand-Alone
Special properties: NAT
VPN
Development process certified in accordance with IEC 62443-4-1
Compatible with IEC 62443-4-2
Data management status
Article revision: 05
Insulation characteristics
Protection class: III (IEC 61140, EN 61140, VDE 0140-1)
Security functions
1:1 Network Address Translation (NAT) in the VPN: supported
Number of VPN tunnels: 250
Authentication: X.509v3 certificates with RSA or PSK
Data integrity: MD5, SHA-1, SHA 256, SHA-512
Dynamic Host Configuration Protocol (DHCP) support: Server or Relay Agent
Filtering: MAC and IP addresses, ports, protocols
Firewall data throughput: max. 940 Mbps (Router mode, default firewall rules, unidirectional throughput)
max. 850 Mbps (Stealth mode, default firewall rules, unidirectional throughput)
Firewall rules: Configurable stateful inspection firewall with full scope of functions, safe isolation for PROFIsafe in accordance with IEC 61784-3-3, user firewall, conditional firewall, rule sets
Basic functions: Security appliance with intelligent firewall and VPN for 250 tunnels, plastic housing, slot for SD memory card, extended temperature range, Gigabit wire speed
Internet Protocol Security (IPsec) mode: ESP tunnel / ESP transport
Link Layer Discovery Protocol (LLDP): As per protocol 802.2
Network Time Protocol (NTP) client: Client/server
Remote Syslog Logging: on externals server
Routing: Standard routing, NAT, 1:1-NAT, port forwarding
Protection against: IP spoofing, DoS and Syn Flood Protection
Encryption methods: DES, 3DES, AES-128, -192, -256
Virtual private network (VPN) throughput: max. 250 Mbps (Router mode, VPN unidirectional throughput)
|
| Electrical properties | Local diagnostics: US1, US2 Supply voltage US1, US2 Green LED
One LED per port Link active / Speed Green / green/yellow LED
Maximum power dissipation for nominal condition: typ. 2.88 W
Supply
Supply voltage (DC): 24 V DC (redundant)
Supply voltage range: 12 V DC ... 36 V DC
Power supply connection: via COMBICON, max. conductor cross section 1.5 mm²
Residual ripple: 3.6 VPP (within the permitted voltage range)
Max. current consumption: 1 A
Typical current consumption: 120 mA (at US = 24 V DC)
Function
Signal contact control voltage: 24 V DC (typical)
Signal contact control current: 250 mA (short-circuit-proof)
|
| Connection data | Connection method: RJ45 jack, shielded
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20
Ambient temperature (operation): -40 °C ... 60 °C
Ambient temperature (storage/transport): -40 °C ... 70 °C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
|
| Standards and regulations | Free from substances that could impair the application of coating: Yes
|
| Approvals | Conformity/Approvals
Conformance: CE-compliant
|
| Mounting | Mounting type: DIN rail mounting
|
| EMC data | Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU
Conformance with EMC directives: IEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge
IEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) 10 V/m (80 MHz ... 6000 MHz)
IEC 61000-6-2 IEC 61000-4-4 (burst) 2 kV power line, 2 kV data line
IEC 61000-6-2 IEC 61000-4-5 (surge) power line: 1 kV (line/earth), 0.5 kV (line/line), 1 kV data line
IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) 10 V (150 kHz ... 80 MHz)
Noise immunity: EN 61000-6-2:2005
Noise emission: EN 61000-6-4
|
| Signaling | Status display: LEDs: US1, US2, FAIL, Link, and Activity
|
Available 
