Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PHOENIX CONTACT 1412820
PHOENIX CONTACTNot available

VS-M12FSBP-OE-94C-LI/2,0 - Device connector, rear mounting

Device connector, rear mounting, Ethernet, 8-position, PUR, water blue RAL5021, Flush-type female connector straight M12, coding: A SPEEDCON / IP67, on free cable end, cable length: 2 m, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1260718
Product Code: 1412820
Partner cod.: 1412820
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
NotesGeneral: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Product propertiesProduct type: Data cable preassembled
Sensor type: Ethernet
Number of positions: 8
No. of cable outlets: 1
Shielded: yes
Coding: A
Insulation characteristics
Overvoltage category: II
Degree of pollution: 3
InterfacesSignal type/category: Ethernet
Electrical propertiesRated surge voltage: 0.8 kV
Contact resistance: ≤ 3 mΩ
Insulation resistance: ≥ 100 MΩ
Nominal voltage UN: 48 VAC
Nominal current IN: 2 A
Transmission medium: Copper
Wave impedance: 100 Ω
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: ≥ 100
Material specificationsFlammability rating according to UL 94: V2
Seal material: FKM
Contact material: CuZn
Contact surface material: Ni/Au
Contact carrier material: PA 6.6
Outer sheath, material: PUR
Conductor material: Bare Cu litz wires
ConnectorConnection 1
Type: Flush-type female connector straight M12 SPEEDCON / IP67
Number of positions: 8
Coding type: A (Standard)
Degree of protection: IP67
Locking type: SPEEDCON
Connection 2
Type: free cable end
Cable/lineCable length: 2 m
Ethernet drag chain CAT5, 4-pair[94C]
Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/7d8f0a2df9771f40aac7b9675a7fbd3f/-S204x204-FJPG
Cable weight: 57 kg/km
UL AWM Style: 20963 (80°C/30 V)
Number of positions: 8
Shielded: yes
Cable type: Ethernet drag chain CAT5, 4-pair[94C]
Conductor structure: 4x2xAWG26/19, S/UTP
Signal runtime: 5.3 ns/m
Conductor structure signal line: 19x 0.10 mm
AWG signal line: 26
Conductor cross section: 4x 2x 0.14 mm²
Wire diameter incl. insulation: 1 mm
External cable diameter: 6.9 mm +0.1mm ... 0.2mm
Outer sheath, material: PUR
External sheath, color: water blue RAL5021
Conductor material: Bare Cu litz wires
Material wire insulation: PP
Single wire, color: white/blue-blue, white/orange-orange, white/green-green, white/brown-brown
Thickness, outer sheath: 0.85 mm
Twisted pairs: 2 cores to the pair
Overall twist: Four pairs and four fillers to the core
Optical shield covering: 90 %
Insulation resistance: ≥ 500 MΩ*km
Coupling resistance: ≤ 100.00 mΩ/m (at 10 MHz)
Loop resistance: ≤ 290.00 Ω/km
Wave impedance: 100 Ω ±5Ω (at 100 MHz)
Cable capacity: approx. 50 nF/km (at 1 kHz)
Nominal voltage, cable: ≤ 100 V
Test voltage Core/Core: 700 V (50Hz, 1min.)
Test voltage Core/Shield: 700 V (50Hz, 1min.)
Minimum bending radius, fixed installation: 4 x D
Minimum bending radius, flexible installation: 8 x D
Max. bending cycles: 5000000
Tensile strength: ≤ 100 N
Near end crosstalk attenuation (NEXT): 65.3 dB (with 1 MHz)
56.3 dB (at 4 МHz)
50.3 dB (at 10 MHz)
47.2 dB (at 16 MHz)
45.8 dB (at 20МHz)
42.9 dB (at 31.25МHz)
38.4 dB (at 62.5МHz)
35.3 dB (at 100 MHz)
Power-summated near end crosstalk attenuation (PSNEXT): 62.3 dB (with 1 MHz)
53.3 dB (at 4 МHz)
47.3 dB (at 10 MHz)
44.2 dB (at 16 MHz)
42.8 dB (at 20МHz)
39.9 dB (at 31.25МHz)
35.4 dB (at 62.5МHz)
32.3 dB (at 100 MHz)
Return attenuation (RL): 23 dB (at 4 МHz)
24.1 dB (at 8МHz)
25 dB (at 10 MHz)
25 dB (at 16 MHz)
25 dB (at 20МHz)
23.6 dB (at 31.25МHz)
21.5 dB (at 62.5МHz)
20.1 dB (at 100 MHz)
Shield attenuation: 3.2 dB (with 1 MHz)
6 dB (at 4 МHz)
9.5 dB (at 10 MHz)
12.1 dB (at 16 MHz)
13.6 dB (at 20МHz)
17.1 dB (at 31.25МHz)
24.8 dB (at 62.5МHz)
32 dB (at 100 MHz)
Halogen-free: according to IEC 60754-1
Flame resistance: according to IEC 60332-1-2
Resistance to oil: in accordance with EN 60811-2-1
Ambient temperature (operation): -40°C ... 80°C (cable, fixed installation)
-20°C ... 80°C (Cable, flexible installation)
Ambient temperature (installation): -20°C ... 80°C
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation): -25°C ... 85°C (Plug / socket)
-40°C ... 85°C (without mechanical actuation)
-25°C ... 85°C (Cable, flexible installation)
Technical Specs
ECLASSECLASS-11.0: 27060308
ECLASS-12.0: 27060308
ECLASS-13.0: 27060308
ETIMETIM 9.0: EC002599
UNSPSCUNSPSC 21.0: 26121600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Design-In_00002.pdf

Manufacturer_declaration_07746.pdf

Technical_drawing_09185.pdf