Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 1413612
PHOENIX CONTACTNot available

VS-PPC/PL-PPC/PL-94C-LI/10,0 - Network cable

Assembled Ethernet cable, shielded, 4-pair, AWG 26 suitable for use with drag chain (19-wire), RAL 5021 (sea blue), RJ45 connector/IP67 push/pull plastic housing on RJ 45 connector/IP67 push/pull plastic housing, line, length 10 m
Product Code: 1413612
Partner cod.: 1413612
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
Product propertiesProduct type: Data cable preassembled
Sensor type: Ethernet
Number of positions: 8
Connection profile: RJ45
No. of cable outlets: 1
Number of slots: 1
Shielded: yes
Cable outlet: straight
Insulation characteristics
Degree of pollution: 2
Electrical propertiesTransmission medium: Copper
Transmission speed: 1 Gbps
Wave impedance: 100 Ω
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: ≥ 200
Material specificationsColor: black
Flammability rating according to UL 94: V2
Outer sheath, material: PUR
Conductor material: Bare Cu litz wires
ConnectorConnection 1
Type: Plug straight RJ45
Material: Plastic
Degree of protection: IP67
Number of positions: 8
Locking type: Push Pull
Connection 2
Type: Plug straight RJ45
Material: Plastic
Number of positions: 8
Degree of protection: IP67
Locking type: Push Pull
Cable/lineCable length: 10.00 m
Ethernet drag chain CAT5, 4-pair[94C]
Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/7d8f0a2df9771f40aac7b9675a7fbd3f/-S204x204-FJPG
Shielded: yes
UL AWM Style: 20963 (80°C/30 V)
Cable weight: 57 kg/km
Cable type: Ethernet drag chain CAT5, 4-pair
Short symbol: 9YC(ST)11Y
Cable type (abbreviation): 94C
Signal type/category: Ethernet CAT5 (IEC 11801), 1 Gbps
Cable structure: 4x2xAWG26/19, S/UTP
External cable diameter: 6.9 mm +0.1mm ... 0.2mm
Outer sheath, material: PUR
External sheath, color: water blue RAL5021
Thickness, outer sheath: 0.85 mm
Conductor material: Bare Cu litz wires
Conductor structure signal line: 19x 0.10 mm
AWG signal line: 26
Conductor cross section: 4x 2x 0.14 mm²
Material wire insulation: PP
Wire diameter incl. insulation: 1 mm
Single wire, color: white/blue-blue, white/orange-orange, white/green-green, white/brown-brown
Twisted pairs: 2 cores to the pair
Overall twist: Four pairs and four fillers to the core
Shielding: Tinned copper braided shield
Optical shield covering: 90 %
Nominal voltage, cable: ≤ 100 V
Test voltage Core/Core: 700 V (50Hz, 1min.)
Test voltage Core/Shield: 700 V (50Hz, 1min.)
Cable insulation resistance: ≥ 500 MΩ*km
Coupling resistance: ≤ 100.00 mΩ/m (at 10 MHz)
Wave impedance: 100 Ω ±5Ω (at 100 MHz)
Loop resistance: ≤ 290.00 Ω/km
Cable capacity: approx. 50 nF/km (at 1 kHz)
Signal runtime: 5.3 ns/m
Tensile strength: ≤ 100 N
Minimum bending radius, fixed installation: 4 x D
Minimum bending radius, flexible installation: 8 x D
Number of bending cycles: 5000000
Minimum bending radius, drag chain applications: 7,5 x D
Traversing rate: 3 m/s
Acceleration: 5 m/s²
Damping: 3.2 dB (with 1 MHz)
6 dB (at 4 МHz)
9.5 dB (at 10 MHz)
12.1 dB (at 16 MHz)
13.6 dB (at 20МHz)
17.1 dB (at 31.25МHz)
24.8 dB (at 62.5МHz)
32 dB (at 100 MHz)
Near end crosstalk attenuation (NEXT): 65.3 dB (with 1 MHz)
56.3 dB (at 4 МHz)
50.3 dB (at 10 MHz)
47.2 dB (at 16 MHz)
45.8 dB (at 20МHz)
42.9 dB (at 31.25МHz)
38.4 dB (at 62.5МHz)
35.3 dB (at 100 MHz)
Power-summated near end crosstalk attenuation (PSNEXT): 62.3 dB (with 1 MHz)
53.3 dB (at 4 МHz)
47.3 dB (at 10 MHz)
44.2 dB (at 16 MHz)
42.8 dB (at 20МHz)
39.9 dB (at 31.25МHz)
35.4 dB (at 62.5МHz)
32.3 dB (at 100 MHz)
Return attenuation (RL): 23 dB (at 4 МHz)
24.1 dB (at 8МHz)
25 dB (at 10 MHz)
25 dB (at 16 MHz)
25 dB (at 20МHz)
23.6 dB (at 31.25МHz)
21.5 dB (at 62.5МHz)
20.1 dB (at 100 MHz)
Halogen-free: according to IEC 60754-1
Resistance to oil: in accordance with EN 60811-2-1
Flame resistance: according to IEC 60332-1-2
Ambient temperature (operation): -20°C ... 80°C (Cable, flexible installation)
-40°C ... 80°C (cable, fixed installation)
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP65
IP67
IP65/IP67
Standards and regulationsStandards/specifications: IEC PAS61076-3-117
Technical Specs
ECLASSECLASS-11.0: 27060307
ECLASS-12.0: 27060307
ECLASS-13.0: 27060307
ETIMETIM 9.0: EC001855
UNSPSCUNSPSC 21.0: 26121600
Description
Assembled Ethernet cable, shielded, 4-pair, AWG 26 suitable for use with drag chain (19-wire), RAL 5021 (sea blue), RJ45 connector/IP67 push/pull plastic housing on RJ 45 connector/IP67 push/pull plastic housing, line, length 10 m
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Manufacturer_declaration_00192.pdf

Manufacturer_declaration_02441.pdf

Technical_drawing_13763.pdf