1414417 PHOENIX CONTACT - Technology Bsa

SACC-CC-5QO-0,75 SH - Conductor connectors

Cable connector, 5-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm

Product Code: 1414417

Partner cod.: 1414417

PHOENIX CONTACT

Notes	General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties.
Mounting	Assembly instructions: If the conductor is to be reconnected, it must be cut off above the last contact point. Connection method: Insulation displacement connection
Product properties	Product type: Cable connector Sensor type: Universal Number of positions: 5 No. of cable outlets: 2 Shielded: yes Insulation characteristics Overvoltage category: II Degree of pollution: 3
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/1b966ecefe0bce429841613b6949efd2/-S204x204-FJPG Length: 83 mm Wrench size, union nut: 15 mm Wrench size, counter nut: 17 mm External dimensions Outside diameter: 5 mm ... 9.7 mm
Connection data	Connection technology Connection method: Insulation displacement connection Frequency of connections between conductors of the same cross section: 10 Conductor connection Conductor cross section flexible: 0.14 mm²0.75 mm² Conductor cross section AWG: 2618 Structure of individual litz in acc. with VDE 0295 / smallest wire diameter: Class 2-6 Tightening torque: 5 Nm (Pressure nut) Wrench size, union nut: 15 mm Wrench size, contact carrier: 17 mm Wire diameter including insulation: 0.75 mm ... 2 mm Pin assignment Contact \| Color (signal designation) \| Contact (optional): 2 = WH 3 = BU 4 = BK 5 = GY
Electrical properties	Rated surge voltage: 0.8 kV Insulation resistance: Ã¢¥ 100 MÃ© Nominal voltage U_N: 48 VAC 60 VDC Nominal current I_N: 4 A
Material specifications	Flammability rating according to UL 94: V0 Seal material: NBR Material of grip body: Zinc die-cast, nickel-plated Contact material: CuSn Contact surface material: Ni/Au Contact carrier material: PA 6.6 Material for screw connection: Zinc die-cast, nickel-plated Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) Wire insulation material: PVC / PE / PP / rubber
Connector	Connection 1 Head design: Cable connectors
Cable/line	Signal type/category: Universal
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 IP67 Ambient temperature (operation): -40°C ... 85°C Ambient temperature (assembly): -5°C ... 50°C
Standards and regulations	Testing Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) Standards/specifications: according to IEC 61076-2-101 EN50155:2001 Standard designation: Shock, vibration