1421129 PHOENIX CONTACT - Technology Bsa

CUC-INI-C1ZNI-S/R4IP8 - RJ45 male insert

RJ45 male insert, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5 (IEC11801:2002), material: Metal, connection method: Insulation displacement connection, connection cross section: AWG 23- 22, cable outlet: straight, Ethernet/PROFINET

Product Code: 1421129

Partner cod.: 1421129

PHOENIX CONTACT

Notes	General: This item is a replacement RJ45 CAT5 connector insert for a push-pull ADVANCE connector (version 14). Connectors that are compatible with this replacement part are listed under Accessories.
Product properties	Type: RJ45 Product type: Data connector (cable side) Sensor type: Ethernet/PROFINET Number of positions: 8 Connection profile: RJ45 No. of cable outlets: 1 Series: HC-M-RJ45-AD-I Shielded: yes Cable outlet: straight Positions/contacts: 8P8C Insulation characteristics Overvoltage category: I Degree of pollution: 2
Electrical properties	Rated voltage (III/3): 72 V (DC) Rated current: 1.75 A Contact resistance: < 20 mÃ© (Contact) < 100 mÃ© (shield) > 10 mÃ© (Wire Ã¢ IDC) 0.005 Ã© (Litz wires Ã¢ IDC) Frequency range: to 100 MHz Insulation resistance: > 500 MÃ© Nominal voltage U_N: 48 V Nominal current I_N: 1.75 A Contact resistance per contact pair: < 20 Ã© Transmission medium: Copper Transmission characteristics (category): CAT5 (IEC 11801:2002) Transmission speed: 1 Gbps Power transmission: PoE++
Connection data	Connection technology Connection method: Insulation displacement connection Connection cross section AWG: 23 ... 22 (solid) 23 ... 22 (flexible) Conductor cross section: 0.25 mm² ... 0.34 mm² (solid) 0.25 mm² ... 0.34 mm² (flexible) Connection in acc. with standard: In accordance with IEC 60603-7-1 Cable outlet, angle: 180
Dimensions	Width: 13.65 mm Height: 43.4 mm Length: 10.5 mm
Material specifications	Flammability rating according to UL 94: V0 Housing surface material: Ni Contact material: CuSn Contact surface material: Au/Ni Contact carrier material: PC Housing material: Metal
Cable/line	External cable diameter (): 5 mm ... 9 mm External cable diameter: 5 mm ... 9 mm Wire diameter including insulation: Ã¢¤ 1.6 mm Test voltage Core/Core: 1000 V Test voltage Core/Shield: 1500 V
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢¥ 750 Insertion force per signal contact: < 20.00 N Extraction force per signal contact: < 20 N
Environmental and real-life conditions	Test specification Type of test: Vibration test Specification: IEC 60068-2-6 Frequency: 10-500 Hz Sweep speed: 1octave/min Amplitude: 0.35 mm Acceleration: 50 m/s² Test duration: 20 s Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 70°C
Mounting	Mounting type: For field assembly Connection method: Insulation displacement connection