Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PHOENIX CONTACT 1424177
PHOENIX CONTACT 1424177
PHOENIX CONTACTNot available

SACC-DSI-FSX-8CON-M16-L180 SCO - Device connector, rear mounting

Device connector, rear mounting, Ethernet CAT6A (10 Gbps) CAT6A, 8-position, Socket, straight-SPEEDCON, coding: X, Rear mounting, M16 x 1.5, Solder pins, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1237405
Product Code: 1424177
Partner cod.: 1424177
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
NotesGeneral: The electrical and mechanical data specified assumes that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of pollution, the connector must be sealed using a protective cap >IP54. Influences arising from litz wires, cables, or PCB mounting must also be taken into consideration. Additional mechanical fixing of the PCB is required.
Lock nut is included in the scope of delivery
MountingMounting type: Rear mounting M16 x 1.5
Connection method: Solder pins
Product propertiesProduct type: Circular connectors (device side)
Sensor type: Ethernet
Number of positions: 8
Shielded: yes
Coding: X
Thread type: M12
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c122abc6be73e146878ff8059e5dbf0a/-S204x204-FJPG
Length of the solder pin: 6 mm
Material specificationsMaterial: Zinc die-cast (nickel-plated)
Flammability rating according to UL 94: V0
Seal material: FKM
Material of grip body: Zinc die-cast, nickel-plated
Contact material: CuZn
Contact surface material: gold-plated
Contact carrier material: PPA
Material for screw connection: Zinc die-cast, nickel-plated
Electrical propertiesRated surge voltage: 0.8 kV
Contact resistance: ≤ 3 mΩ
Insulation resistance: > 100 MΩ
Nominal voltage UN: 48 VAC
60 VDC
Nominal current IN: 0.5 A (Data)
Transmission characteristics (category): CAT6A
Connection dataConductor connection
Connection method: Solder pins
Contact connection type: Socket
Tightening torque: 2 Nm
3 Nm
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: ≥ 100
ConnectorConnection 1
Head design: Socket
Head cable outlet: straight
Head locking type: SPEEDCON
Coding: X
Cable/lineSignal type/category: Ethernet CAT6A, 10 Gbps
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP67 (When plugged in)
IP67
Ambient temperature (operation): -25°C ... 85°C (Plug / socket)
-40°C ... 85°C (without mechanical actuation)
Standards and regulationsM12
Standard designation: M12 connector
Shock, vibration
Standards/specifications: IEC 61076-2-109
EN50155
Technical Specs
ECLASSECLASS-11.0: 27440102
ECLASS-12.0: 27440116
ECLASS-13.0: 27440116
ETIMETIM 9.0: EC002635
UNSPSCUNSPSC 21.0: 39121400
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00603.pdf

Design-In_00002.pdf

Manufacturer_declaration_05485.pdf

Manufacturer_declaration_08202.pdf

Technical_drawing_14983.pdf