Industrial Automation
Notes | General: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
Mounting | Mounting type: Front mounting Square flange With flat nut, tightening limitation Assembly instructions: With flat nut, tightening limitation Connection method: Individual wires |
Product properties | Product type: Circular connectors (device side) Sensor type: Power Number of positions: 4 No. of cable outlets: 1 Shielded: no Coding: L Thread type: M12 Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
Material specifications | Flammability rating according to UL 94: V0 Seal material: FKM Contact material: CuZn Contact surface material: Ni/Au Contact carrier material: PA Material for screw connection: CuZn alloy, nickel-plated Conductor material: Bare Cu litz wires |
Electrical properties | Rated surge voltage: 1.5 kV 1.5 kV AC/DC Nominal voltage UN: 63 VDC Nominal current IN: 12 A Test voltage: 1.5 kV Test voltage Core/Core: 3 kV |
Connection data | Conductor connection Connection method: Individual wires Contact connection type: Pin Conductor cross section: 1.31 mm² |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: > 100 |
Connector | Connection 1 Head design: Pin Head cable outlet: straight Head thread type: M12 Head locking type: Standard Coding: L Connection 2 Head design: free cable end |
Cable/line | Cable length: 0.2 m Cable type: UL/cUL stranded hook-up wire Signal type/category: Power Wire diameter incl. insulation: 2 mm Single wire, color: brown 1, white 2, blue 3, black 4 Cable cross section: 1.31 mm² Conductor material: Bare Cu litz wires AWG signal line: 16 Material wire insulation: mPPE Test voltage Core/Core: 3 kV Halogen-free: yes Flame resistance: in acc. to UL1581 VW1 Ambient temperature (operation): -40°C ... 85°C (without mechanical actuation) -25°C ... 105°C (Cable, flexible installation) |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP67 IP65/IP67 Ambient temperature (operation): -25°C ... 85°C (Plug / socket) -40°C ... 85°C (without mechanical actuation) -25°C ... 105°C (Cable, flexible installation) -40°C ... 105°C (cable, fixed installation) |
Standards and regulations | Flame resistance: in acc. to UL1581 VW1 M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-111 Note: In line with |
Description other products