1436636 PHOENIX CONTACT - Technology Bsa

CHARX T1HBI12-DC200-3,0M1 - Vehicle charging inlet

CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 1, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), Single wires, length: 3 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts.

Product Code: 1436636

Partner cod.: 1436636

PHOENIX CONTACT

Notes	General: A protective cap is supplied as standard for the DC contacts.
Product properties	Product type: Vehicle charging inlet Product family: CHARX connect universal Application: for charging with direct current (DC) for installation in electric vehicles (EV) Technology: Combined Charging System Charging standard: CCS type 1 Charging mode: Mode 4 Data management status Article revision: 02
Electrical properties	Type of signal transmission: Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 Note on the connection method: Crimp connection, cannot be disconnected Insulation resistance: > 200 MÃ© Coding: 2.7 kÃ© (between PE and CS) Temperature measurement: DC contacts: 2x PT1000 (DIN EN 60751) Type of charging current: DC Charging power: 200 kW Charging current: 200 A Power contact Number: 5 (L1, N, PE, DC+, DC-) Rated voltage: 1000 V DC Rated current: 200 A DC Signal contact Number: 2 (CP, CS) Rated voltage: 30 V AC Rated current: 2 A Temperature sensors (Pt 1000) Sensor type: Pt 1000 Standards/regulations: DIN EN 60751 Attachment point: 2 sensors for the DC contacts Recommended measured current: Ã¢Ã¢°¤ 1 mA (U_max= 16 V DC) Coefficient: 3850 ppm/K Ambient temperature: -40 °C ... 130 °C Locking actuator Operating voltage: 12 V Note number of positions: 4-pos. Position of the locking actuator: top center Locking actuatorÃ¢Ã¢¬Ã¢¹ Operating voltage: 12 V Note number of positions: 4-pos. Position of the locking actuator: top center Possible power supply range at the motor: 9 V ... 16 V Maximum voltage for locking detection: 12 V Typical motor current for locking: 0.25 A Reverse current of the motor: max. 1.5 A Max. dwell time with reverse current: 1 s Recommended adaptation time: 600 ms Pause time after entry or exit path: 3 s Service life insertion cycles: > 10000 load cycles Lock recognition: available Mechanical emergency release: available Ambient temperature (operation): -40 °C ... 80 °C
Dimensions	Width: 117.6 mm Height: 90 mm Depth: 117.6 mm
Material specifications	Color (Housing): black (9005) Color (Mating face): black (9005) Material (Housing): Plastic Material (Contact surface): Silver
Cable/line	Cable length: 3 m Cable type: Single wires Single-core wires for DC Cable length: 3 m Cable structure: 2 x 70 mm² Single wire, material: Silicone Single wire, color: OG External cable diameter: 17.90 mm Ã±0.3 mm Cable resistance: Ã¢Ã¢°¤ 0.259 Ã©/km Single-core wire for PE Cable length: 3 m Cable structure: 1 x 25 mm² Single wire, material: Silicone Single wire, color: GN/YE External cable diameter: 8.60 mm Ã±0.1 mm Cable resistance: Ã¢Ã¢°¤ 0.743 Ã©/km Single-core wires for locking actuator Cable length: 1.5 m Cable structure: 4 x 0.5 mm² Single wire, material: PVC Single wire, color: BU/RD, BU/GN, BU/YE, BU/BN External cable diameter: 1.60 mm Ã±0.20 mm Cable resistance: Ã¢Ã¢°¤ 37.1 Ã©/m Single-core wires for Pt 1000 temperature sensors Cable length: 1 m Cable structure: 3 x 0.5 mm² Single wire, material: PVC Single wire, color: BN GN YE External cable diameter: 1.60 mm Ã±0.20 mm Cable resistance: Ã¢Ã¢°¤ 37.1 Ã©/m Single-core wires for communication Cable length: 1 m Cable structure: 2 x 0.5 mm² Single wire, material: PVC Single wire, color: BK WH External cable diameter: 1.60 mm Ã±0.20 mm Cable resistance: Ã¢Ã¢°¤ 37.1 Ã©/m
Mechanical properties	Mechanical data Insertion/withdrawal cycles: > 10000 Insertion force: < 100 N Withdrawal force: < 100 N
Environmental and real-life conditions	Ambient conditions Degree of protection (Vehicle charging inlet): IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) IP67 (Inner area of vehicle charging inlet) Ambient temperature (operation): -40 °C ... 40 °C (60 °C, maximum (current reduction required, observe the DC contact temperature limit value of 90 °C)) Ambient temperature (storage/transport): -40 °C ... 85 °C Altitude: 4000 m (above sea level)
Standards and regulations	Standards Standards/regulations: IEC 62196-2 IEC 62196-3 SAE J1772
Mounting	Mounting type: Front and rear mounting (0 to 90 degree frontal inclination possible) Mounting hole diameter: 6.70 mm (Ã¸) Fixing screws: M6 Screws included in the scope of delivery: none