Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PHOENIX CONTACT 1442311
PHOENIX CONTACTNot available

SACCBP-MS-17CON-M16/2,0-PVCSCO - Device connector, rear mounting

Device connector, rear mounting, Universal, 17-position, PVC/PVC, black RAL9005, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1239772
Product Code: 1442311
Partner cod.: 1442311
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
NotesGeneral: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
MountingMounting type: Rear mounting M16 x 1.5 Thread with flat nut
Assembly instructions: Thread with flat nut
Connection method: Cable connection
Product propertiesProduct type: Circular connectors (device side)
Sensor type: Universal
Number of positions: 17
No. of cable outlets: 1
Shielded: yes
Coding: A
Thread type: M12
Insulation characteristics
Overvoltage category: II
Degree of pollution: 3
Material specificationsFlammability rating according to UL 94: V0
Seal material: FKM
Contact material: CuZn
Contact surface material: Au
Contact carrier material: PA 6.6
Material for screw connection: Zinc die-cast, nickel-plated
Outer sheath, material: PVC
Conductor material: Tin-plated Cu litz wires
Electrical propertiesRated surge voltage: 0.8 kV
Contact resistance: ≤ 3 mΩ
Insulation resistance: ≥ 100 MΩ
Nominal voltage UN: 30 V
Nominal current IN: 1.5 A
Max. conductor resistance: 142 Ω/km
Connection dataConductor connection
Connection method: Cable connection
Contact connection type: Pin
Conductor cross section: 0.14 mm²
Tightening torque: 3 Nm
4 Nm
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: > 100
Max. bending cycles: 2000000
ConnectorConnection 1
Head design: Pin
Head cable outlet: straight
Head thread type: M12
Head locking type: SPEEDCON
Coding: A
Connection 2
Head design: free cable end
Cable/lineCable length: 2 m
Cable type: PVC black
Short symbol: PVC
Signal type/category: Universal
External cable diameter: 9.20 mm
Outer sheath, material: PVC
External sheath, color: black RAL9005
Wire diameter incl. insulation: 1.1 mm ±0.05 mm
Single wire, color: white-brown, green-yellow, gray-pink, blue-red, black-violet, gray/pink-red/blue, white/green-brown/green, white/yellow-yellow/brown-white/gray
Cable cross section: 0.14 mm²
Material, inner sheath: PVC
Conductor material: Tin-plated Cu litz wires
Conductor structure signal line: 7x 0.16 mm
AWG signal line: 26
Material wire insulation: PVC
Thickness, insulation: 0.21 mm
Overall twist: Eight pairs around the filler to the core
Shielding: Tinned copper braided shield
Optical shield covering: 85 %
Nominal voltage, cable: 300 V
Test voltage, cable: 2000 VAC
Cable resistance: 142 Ω/km
Number of bending cycles: 2000000
Bending radius: 92 mm
Traversing path: 10 m
Traversing rate: 3 m/s
Acceleration: 10 m/s²
Resistance to oil: DIN VDE 0472 Part 803, test type B
Flame resistance: DINVDE0472 part 804, test type B
Other resistance: Hydrolysis and microbe resistant as per VDE 0282 section 10
Ambient temperature (operation): -40°C ... 85°C (cable, fixed installation)
-25°C ... 85°C (Cable, flexible installation)
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation): -25°C ... 85°C (Plug / socket)
-40°C ... 85°C (without mechanical actuation)
-25°C ... 85°C (Cable, flexible installation)
-40°C ... 85°C (cable, fixed installation)
Resistance to oil: DIN VDE 0472 Part 803, test type B
Standards and regulationsFlame resistance: DINVDE0472 part 804, test type B
Resistance to oil: DIN VDE 0472 Part 803, test type B
Other resistance: Hydrolysis and microbe resistant as per VDE 0282 section 10
Standard designation: M12 connector
Standards/specifications: IEC 61076-2-101
Technical Specs
ECLASSECLASS-11.0: 27440102
ECLASS-12.0: 27440116
ECLASS-13.0: 27440116
ETIMETIM 9.0: EC002635
UNSPSCUNSPSC 21.0: 39121400
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00962.pdf

Design-In_00002.pdf

Manufacturer_declaration_05485.pdf

Manufacturer_declaration_08782.pdf

Technical_drawing_15709.pdf