Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PHOENIX CONTACT 1550164
PHOENIX CONTACTNot available

SACCBP-M12MS-5CON-M16/0,5-PUR - Device connector, rear mounting

Device connector, rear mounting, 5-position, PUR, black-gray RAL 7021, Pin, straight, Rear mounting, M16 x 1.5 thread with flat nut, M16 x 1.5, cable length: 0.5 m, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1239980
Product Code: 1550164
Partner cod.: 1550164
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
NotesSafety note
Safety note: WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by PhoenixContact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
MountingMounting type: Rear mounting, M16 x 1.5 thread with flat nut
Product propertiesProduct type: Circular connectors (device side)
Number of positions: 5
No. of cable outlets: 1
Shielded: yes
Coding: A
Thread type: M12
Insulation characteristics
Overvoltage category: II
Degree of pollution: 3
Material specificationsFlammability rating according to UL 94: V0
Seal material: NBR
Contact material: CuZn
Contact surface material: Ni/Au
Contact carrier material: PA 6.6
Material for screw connection: Zinc die-cast, nickel-plated
Outer sheath, material: PUR
Conductor material: Bare Cu litz wires
Electrical propertiesContact resistance: ≤ 3 mΩ
Insulation resistance: ≥ 100 MΩ
Nominal voltage UN: 60 V
Nominal current IN: 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
ConnectorConnection 1
Head design: Pin
Head cable outlet: straight
Cable/lineCable length: 0.5 m
PUR halogen-free black[PUR]
Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/f6755140b03f3e4c93664b7e04b3af23/-S204x204-FJPG
Cable weight: 43 kg/km
UL AWM Style: 20549 / 10493 (80°C/300 V)
Number of positions: 5
Shielded: yes
Cable type: PUR halogen-free black[PUR]
Conductor structure signal line: 42x 0.10 mm
AWG signal line: 22
Conductor cross section: 5x 0.34 mm² (Signal line)
Wire diameter incl. insulation: 1.27 mm ±0.02mm (Signal line)
External cable diameter: 5.25 mm ±0.2mm
Outer sheath, material: PUR
External sheath, color: black-gray RAL 7021
Conductor material: Bare Cu litz wires
Material wire insulation: PP
Single wire, color: brown, white, blue, black, gray
Thickness, insulation: ≥ 0.21 mm
Thickness, outer sheath: approx. 0.5 mm
Overall twist: 5 wires around filler to the core
Optical shield covering: 80 %
Max. conductor resistance: max. 57 Ω/km (at 20°C)
Insulation resistance: 70 GΩ*km (at 20°C)
Nominal voltage, cable: 300 V (at 20°C)
Test voltage Core/Core: 3000 V (at 20°C)
Smallest bending radius, fixed installation: 26 mm
Smallest bending radius, movable installation: 52 mm (up to +60°C)
Max. bending cycles: 10000000
Halogen-free: in accordance with DINVDE0472 part815
in accordance with DINEN50267-2-1
Flame resistance: in accordance with UL758/1581 FT2
DINEN60332-2-2 (20s)
Resistance to oil: in accordance with DIN EN 60811-2-1
Other resistance: Highly resistant to acids, alkaline solutions and solvents
hydrolysis and microbe resistant
Resistant to salt water
partly UV-resistant in accordance with DINENISO4892-2-A
abrasion-resistant
Special properties: Flexible cable conduit capable
Silicone-free
Free of substances which would hinder coating with paint or varnish
Low adhesion surface
Ambient temperature (operation): -40°C ... 80°C (cable, fixed installation)
-25°C ... 80°C (Cable, flexible installation)
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation): -25°C ... 80°C (Plug / socket)
-40°C ... 80°C (cable, fixed installation)
-25°C ... 85°C
Technical Specs
ECLASSECLASS-11.0: 27440102
ECLASS-12.0: 27440116
ECLASS-13.0: 27440116
ETIMETIM 8.0: EC002635
UNSPSCUNSPSC 21.0: 39121400
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00962.pdf

Manufacturer_declaration_01325.pdf

Manufacturer_declaration_02239.pdf

Manufacturer_declaration_05485.pdf

Manufacturer_declaration_09317.pdf

Package_slip_02241.pdf

Technical_drawing_16227.pdf