Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 1555347
PHOENIX CONTACTNot available

SAC-17P- 1,5-PVC/FS SCO - Sensor/actuator cable

Sensor/actuator cable, 17-position, free cable end, on Socket straight M12, coding: A SPEEDCON, cable length: 1.5 m
Product Code: 1555347
Partner cod.: 1555347
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesProduct type: Sensor/actuator cable
Number of positions: 17
Application: Standard
No. of cable outlets: 1
Shielded: no
Coding: A
Insulation characteristics
Overvoltage category: II
Degree of pollution: 3
Material specificationsFlammability rating according to UL 94: HB
Seal material: NBR
Material of grip body: TPU, hardly inflammable, self-extinguishing
Contact material: CuZn
Contact surface material: Ni/Au
Contact carrier material: TPU GF
Material for screw connection: Zinc die-cast, nickel-plated
Electrical propertiesContact resistance: ≤ 5 mΩ
Insulation resistance: ≥ 100 MΩ
Nominal voltage UN: 30 VAC
30 VDC
Nominal current IN: 1.5 A
Protective circuit: unwired
SignalingStatus display: No
Status display present: No
Connection dataConductor connection
Tightening torque: 0.4 Nm (M12 connector)
ConnectorConnection 1
Type: free cable end
Connection 2
Type: Socket straight M12 SPEEDCON
Number of positions: 17
Coding type: A
Locking type: SPEEDCON
Cable/lineCable length: 1.5 m
PVC black[PVC]
Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/55f1f802340ca44fb6a968e2c328046d/-S204x204-FJPG
Number of positions: 17
Shielded: no
Cable type: PVC black[PVC]
Conductor structure signal line: 18x 0.10 mm
AWG signal line: 26
Conductor cross section: 17x 0.14 mm² (Signal line)
Wire diameter incl. insulation: 1 mm ±0.05 mm (Signal line)
External cable diameter: 6.8 mm
Outer sheath, material: PVC
External sheath, color: black RAL9005
Conductor material: Bare Cu litz wires
Material wire insulation: PVC
Single wire, color: white, brown, green, yellow, gray, pink, blue, red, black, violet, gray-pink, red-blue, white-green, brown-green, white-yellow, yellow-brown, white-gray
Overall twist: 17 wires twisted in layers
Max. conductor resistance: ≤ 142 Ω/km (at 20°C)
Insulation resistance: > 10 MΩ*km
Nominal voltage, cable: 250 V
Test voltage Core/Core: 1500 VAC
Smallest bending radius, fixed installation: 34 mm
Smallest bending radius, movable installation: 102 mm
Flame resistance: DINEN50265-2-1
Ambient temperature (operation): -25°C ... 80°C (cable, fixed installation)
-5°C ... 80°C (Cable, flexible installation)
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP65
IP67
IP68
Ambient temperature (operation): -25°C ... 85°C (Plug / socket)
-5°C ... 80°C (Cable, flexible installation)
-25°C ... 80°C (cable, fixed installation)
Standards and regulationsStandard designation: M12 connector
Standards/specifications: IEC 61076-2-101
Technical Specs
ECLASSECLASS-11.0: 27060311
ECLASS-12.0: 27060311
ECLASS-13.0: 27060311
ETIMETIM 9.0: EC001855
UNSPSCUNSPSC 21.0: 26121600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Manufacturer_declaration_00238.pdf

Manufacturer_declaration_02468.pdf

Manufacturer_declaration_05518.pdf