Not available 
| Notes | General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties. |
| Mounting | Connection method: Piercecon® fast connection |
| Product properties | Product type: Circular connector (cable-side) Sensor type: Universal Number of positions: 17 No. of cable outlets: 1 Shielded: no Coding: A Cable outlet: straight Insulation characteristics Overvoltage category: II Degree of pollution: 3 |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/ccabaaf53559c848967b2a4344be3770/-S204x204-FJPG Length: 41.2 mm Wrench size, union nut: 13 mm Wrench size, counter nut: 15 mm External dimensions Outside diameter: 5.4 mm ... 8.2 mm Housing Diameter housing: 16 mm |
| Material specifications | Flammability rating according to UL 94: V0 Seal material: FKM Material of grip body: Zinc die-cast, nickel-plated Contact material: CuZn Contact surface material: Ni/Au Contact carrier material: PA Material for screw connection: Zinc die-cast, nickel-plated Wire insulation material: PUR / PVC |
| Connection data | Conductor connection Connection method: Piercecon® fast connection Connection cross section: 0.14 mm² ... 0.14 mm² (without ferrule) Connection cross section AWG: 26 ... 26 (without ferrule) Tightening torque: 0.4 Nm (M12 knurl) Pin assignment Contact | Color (signal designation) | Contact (optional): 1 = BN 2 = BU 3 = WH 4 = GN 5 = PK 6 = YE 7 = BK 8 = GY 9 = RD 10 = VT 11 = GYPK 12 = RDBU 13 = WHGN 14 = BNGN 15 = WHYE 16 = YEBN 17 = WHGY |
| Electrical properties | Rated surge voltage: 0.8 kV Contact resistance: ≤ 5 mΩ Insulation resistance: ≥ 100 MΩ Nominal voltage UN: 30 VAC 30 VDC Nominal current IN: 1.5 A |
| Mechanical properties | Mechanical data Insertion/withdrawal cycles: ≥ 100 |
| Connector | Connection 1 Head design: Socket Head cable outlet: straight Head thread type: M12 Head locking type: SPEEDCON Coding: A |
| Cable/line | Signal type/category: Universal |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP67 Ambient temperature (operation): -25°C ... 85°C (Plug / socket) |
| Standards and regulations | M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-101 |
| ECLASS | ECLASS-11.0: 27440102 ECLASS-12.0: 27440116 ECLASS-13.0: 27440116 |
| ETIM | ETIM 9.0: EC002635 |
| UNSPSC | UNSPSC 21.0: 39121400 |
Description other products
