Industrial Automation
SDC 2,5/ 2-PV-5,0-ZB - Direct connector
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product line: COMBICON Connectors M Product type: PCB direct plug Product family: SDC 2,5/..-PV Number of positions: 2 Pitch: 5 mm Number of connections: 2 Number of rows: 1 Number of potentials: 2 Pin layout: Zigzag pinning W |
Electrical properties | Nominal current IN: 12 A Nominal voltage UN: 320 V Degree of pollution: 3 Contact resistance: 1.1 mΩ Rated voltage (III/3): 200 V Rated surge voltage (III/3): 4 kV Rated voltage (III/2): 320 V Rated surge voltage (III/2): 4 kV Rated voltage (II/2): 320 V Rated surge voltage (II/2): 4 kV |
Connection data | Connection technology Connector system: SKEDD Nominal cross section: 2.5 mm² Interlock Locking type: Snap-in locking Mounting flange: Self-locking flange Conductor connection Connection method: Push-in spring connection Connection direction of the conductor to plug-in direction: 0 ° Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 2.5 mm² Cylindrical gauge a x b / diameter: 2.4mmx1.5mm/2.4mm Stripping length: 10 mm Conductor connection ​ Connection method: Push-in spring connection Stripping length: 10 mm Specifications for ferrules without insulating collar recommended crimping tool: 1212045 CRIMPFOX 10S ferrules without insulating collar, according to DIN46228‑1: Cross section:0.25 mm²; Length: 7 mm Cross section:0.34 mm²; Length: 7 mm Cross section:0.5 mm²; Length: 8 mm ... 10 mm Cross section:0.75 mm²; Length: 10 mm Cross section:1 mm²; Length: 10 mm Cross section:2.5 mm²; Length: 10 mm Specifications for ferrules with insulating collar recommended crimping tool: 1212045 CRIMPFOX 10S ferrules with insulating collar, according to DIN46228‑4: Cross section:0.25 mm²; Length: 8 mm Cross section:0.34 mm²; Length: 8 mm ... 10 mm Cross section:0.5 mm²; Length: 8 mm ... 10 mm Cross section:0.75 mm²; Length: 8 mm ... 10 mm Cross section:1 mm²; Length: 8 mm ... 10 mm Cross section:1.5 mm²; Length: 8 mm ... 10 mm Cross section:2.5 mm²; Length: 10 mm |
Mounting | Mounting type: SKEDD - Direct plug-in technology Pin layout: Zigzag pinning W Connection method: Push-in spring connection |
Material specifications | Material data - contact Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material: Cu alloy Surface characteristics: Tin-plated Metal surface terminal point (top layer): Tin (4 - 8 µm Sn) Metal surface terminal point (middle layer): Nickel (1.5 - 4 µm Ni) Metal surface contact area (top layer): Tin (4 - 8 µm Sn) Metal surface contact area (middle layer): Nickel (1.5 - 4 µm Ni) Material data - housing Color (Housing): green (6021) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125 °C Material data – actuating element Insulating material: PBT Insulating material group: IIIa CTI according to IEC 60112: 275 Flammability rating according to UL 94: V0 |
Notes | Notes on operation: In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/a4d29c3ce6332549b7d9096aad123eaf/-S204x204-FJPG Pitch: 5 mm Width [w]: 18.18 mm Height [h]: 21.2 mm Length [l]: 15.3 mm Installed height: 16.2 mm Solder pin length [P]: 4.7 mm PCB design Pin spacing: 10.00 mm Hole diameter: 2.4 mm |
Mechanical tests | Conductor connection Specification: IEC60999-1:1999-11 Result: Test passed Test for conductor damage and slackening Specification: IEC60999-1:1999-11 Result: Test passed Repeated connection and disconnection Specification: IEC60999-1:1999-11 Result: Test passed Pull-out test Specification: IEC60999-1:1999-11 Conductor cross section/conductor type/tractive force setpoint/actual value: 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 2.5 mm² / solid / > 50 N 2.5 mm² / flexible / > 50 N Insertion and withdrawal forces Result: Test passed No. of cycles: 25 Insertion strength per pos. approx.: 8 N Withdraw strength per pos. approx.: 6 N Contact holder in insert Specification: IEC60512-15-1:2008-05 Contact holder in insert Requirements >20 N: Test passed Resistance of inscriptions Specification: IEC60068-2-70:1995-12 Result: Test passed Polarization and coding Specification: IEC60512-13-5:2006-02 Result: Test passed Visual inspection Specification: IEC60512-1-1:2002-02 Result: Test passed Dimension check Specification: IEC60512-1-2:2002-02 Result: Test passed |
Electrical tests | Thermal test | Test group C Specification: IEC60512-5-1:2002-02 Tested number of positions: 16 Insulation resistance Specification: IEC60512-3-1:2002-02 Insulation resistance, neighboring positions: >5MΩ Temperature cycles Specification: IEC60999-1:1999-11 Result: Test passed Air clearances and creepage distances | Specification: IEC60664-1:2007-04 Insulating material group: I Comparative tracking index (IEC60112): CTI 275 Rated insulation voltage (III/3): 200 V Rated surge voltage (III/3): 4 kV minimum clearance value - non-homogenous field (III/3): 3 mm minimum creepage distance (III/3): 3.2 mm Rated insulation voltage (III/2): 320 V Rated surge voltage (III/2): 4 kV minimum clearance value - non-homogenous field (III/2): 3 mm minimum creepage distance (III/2): 3.2 mm Rated insulation voltage (II/2): 320 V Rated surge voltage (II/2): 4 kV minimum clearance value - non-homogenous field (II/2): 3 mm minimum creepage distance (II/2): 3.2 mm |
Environmental and real-life conditions | Vibration test Specification: IEC60068-2-6:2007-12 Frequency: 10 - 150 - 10 Hz Sweep speed: 1octave/min 5g (60.1Hz...150Hz) Amplitude: 0.35mm (10Hz...60.1Hz) Test duration per axis: 2.5 h Durability test Specification: IEC60512-9-1:2010-03 Impulse withstand voltage at sea level: 4.8 kV Contact resistance R1: 1.1 mΩ Contact resistance R2: 1.1 mΩ Insertion/withdrawal cycles: 25 Insulation resistance, neighboring positions: >5MΩ Climatic test Specification: ISO6988:1985-02 Corrosive stress: 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle Thermal stress: 100°C/168h Power-frequency withstand voltage: 2.21 kV Ambient conditions Ambient temperature (operation): -40 °C ... 100 °C (dependent on the derating curve) Ambient temperature (storage/transport): -40 °C ... 70 °C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5 °C ... 100 °C |
Packaging specifications | Type of packaging: packed in cardboard |
ECLASS | ECLASS-11.0: 27460202 ECLASS-12.0: 27460202 ECLASS-13.0: 27460202 |
ETIM | ETIM 9.0: EC002638 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products