1933655 PHOENIX CONTACT - Technology Bsa

MKDSP 10HV/ 3-10,16 BSNZ WH/BK - PCB terminal block

PCB terminal block, nominal current: 76 A, rated voltage (III/2): 1000 V, nominal cross section: 16 mm², number of potentials: 3, number of rows: 1, number of positions per row: 3, product range: MKDSP 10HV, pitch: 10.16 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: black, Pin layout: Linear pinning, Solder pin [P]: 5 mm, number of solder pins per potential: 2, type of packaging: packed in cardboard. The article can be aligned to create different nos. of positions! Equipment ratings in acc. with UL, for 600 V applications, are possible. The insulation requirements of the respective devices for PCB assembly must be observed for this purpose (e.g. UL 508).

Product Code: 1933655

Partner cod.: 1933655

PHOENIX CONTACT

Product properties	Type: PC terminal block can be aligned Product line: COMBICON Terminals L Product type: Printed circuit board terminal Product family: MKDSP 10HV Number of positions: 3 Pitch: 10.16 mm Number of connections: 3 Number of rows: 1 Number of potentials: 3 Pin layout: Linear pinning Solder pins per potential: 2
Electrical properties	Nominal current I_N: 76 A Nominal voltage U_N: 1000 V Degree of pollution: 3 Rated voltage (III/3): 690 V Rated surge voltage (III/3): 8 kV Rated voltage (III/2): 1000 V Rated surge voltage (III/2): 8 kV Rated voltage (II/2): 1000 V Rated surge voltage (II/2): 6 kV
Connection data	Connection technology Type: PC terminal block can be aligned Nominal cross section: 16 mm² Conductor connection Connection method: Screw connection with tension sleeve Conductor cross section rigid: 0.5 mm² ... 16 mm² Conductor cross section flexible: 0.5 mm² ... 16 mm² Conductor cross section AWG: 20 ... 6 Conductor cross section flexible, with ferrule without plastic sleeve: 0.5 mm² ... 16 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.5 mm² ... 16 mm² 2 conductors with same cross section, solid: 0.5 mm² ... 4 mm² 2 conductors with same cross section, flexible: 0.5 mm² ... 4 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.5 mm² ... 2.5 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 6 mm² Stripping length: 10 mm Tightening torque: 1.2 Nm ... 1.5 Nm
Mounting	Mounting type: Wave soldering Pin layout: Linear pinning Drive form screw head: Slotted(L) Connection method: Screw connection with tension sleeve Processing notes Process: Wave soldering
Material specifications	Material data - contact Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material: Cu alloy Surface characteristics: Tin-plated Metal surface terminal point (top layer): Tin (5 - 7 µm Sn) Metal surface terminal point (middle layer): Nickel (2 - 3 µm Ni) Metal surface soldering area (top layer): Tin (5 - 7 µm Sn) Metal surface soldering area (middle layer): Nickel (2 - 3 µm Ni) Material data - housing Color (Housing): black (9005) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125 °C
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/158b0afe23d1ab408f646eacfe25f655/-S204x204-FJPG Pitch: 10.16 mm Width [w]: 30.48 mm Height [h]: 35.8 mm Length [l]: 22 mm Installed height: 30.8 mm Solder pin length [P]: 5 mm Pin dimensions: 1 x 0.9 mm PCB design Hole diameter: 1.5 mm
Mechanical tests	Test for conductor damage and slackening Specification: IEC60998-2-1:1990-04 Result: Test passed Pull-out test Specification: IEC60998-2-1:1990-04 Conductor cross section/conductor type/tractive force setpoint/actual value: 0.5 mm² / solid / > 30 N 0.5 mm² / flexible / > 30 N 16 mm² / solid / > 100 N 10 mm² / flexible / > 90 N Torque test Specification: IEC60998-2-1:1990-04
Electrical tests	Temperature-rise test Specification: IEC60998-2-1:1990-04 Requirement temperature-rise test: Increase in temperature Ã¢¤45K Insulation resistance Specification: IEC60998-2-1:1990-04 Insulation resistance, neighboring positions: 10⁹Ã© Air clearances and creepage distances \| Specification: IEC60664-1:2007-04 Insulating material group: I Comparative tracking index (IEC60112): CTI 600 Rated insulation voltage (III/3): 690 V Rated surge voltage (III/3): 8 kV minimum clearance value - non-homogenous field (III/3): 8 mm minimum creepage distance (III/3): 8 mm Rated insulation voltage (III/2): 1000 V Rated surge voltage (III/2): 8 kV minimum clearance value - non-homogenous field (III/2): 8 mm minimum creepage distance (III/2): 8 mm Rated insulation voltage (II/2): 1000 V Rated surge voltage (II/2): 6 kV minimum clearance value - non-homogenous field (II/2): 5.5 mm minimum creepage distance (II/2): 5.5 mm
Environmental and real-life conditions	Vibration test Specification: IEC60068-2-6:1995-03 Frequency: 10 - 150 - 10 Hz Sweep speed: 1octave/min 5g (60.1Hz...150Hz) Amplitude: 0.35mm (10Hz...60.1Hz) Test duration per axis: 2.5 h Glow-wire test Specification: IEC60998-2-1:1990-04 Temperature: 850 °C Time of exposure: 5 s Ambient conditions Ambient temperature (operation): -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport): -40 °C ... 70 °C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5 °C ... 100 °C
Packaging specifications	Type of packaging: packed in cardboard Outer packaging type: Carton