Not available 
| Product properties | Product type: Front adapter Product family: VARIOFACE Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Operating voltage (AC): ≤ 30 VAC Operating voltage (DC): ≤ 60 VDC Nominal operating mode: 100% operating factor Current (per branch): ≤ 1 A Current (Voltage supply via IDC/FLK): ≤ 2 A Current (Voltage supply via spade connection): ≤ 8 A Air clearances and creepage distances Rated insulation voltage: 63 V Rated surge voltage: 0.6 kV (1.2/50 μs) Supported controller SIEMENS S7-300 / ET 200 M Suitable I/O card: CPU 312C CPU 313C CPU 313C-2DP CPU 313C-2PtP CPU 314C-2DP CPU 314C-2PtP 6ES7321-1BL00-0AA0 6ES7322-8BH01-0AB0 6ES7322-1BL00-0AA0 6ES7322-8BH10-0AB0 6ES7323-1BL00-0AA0 6ES7331-1KF01-0AB0 6ES7331-1KF02-0AB0 6ES7331-7NF00-0AB0 6ES7331-7NF10-0AB0 6ES7331-7PF01-0AB0 6ES7331-7PF11-0AB0 6ES7332-5HF00-0AB0 6ES7350-2AH01-0AE0 6ES7357-4AH01-0AE0 |
| Connection data | Connection1 (control level) Connection method: Plug-in connection Number of positions: 40 Connection2 (field level) Connection in acc. with standard: IEC 60603-13 Connection method: IDC/FLK pin strip Number of connections: 1 Number of positions: 50 Insertion/withdrawal cycles: > 50 Pitch: 2.54 mm Connection3 (supply) Connection method: Spade connection Number of positions: 4 Note: 2,8 x 0,8 |
| Dimensions | Item dimensions Width: 115.01 mm Height: 21.3 mm Depth: 29.09 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection (Module): IP00 Degree of protection (Installation location): ≥ IP54 Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 70°C Altitude: ≤ 2000 m |
| Standards and regulations | Air clearances and creepage distances Standards/regulations: ENIEC 60664-1 |
| Mounting | Mounting type: Plug-in mounting Mounting position: any |
| Notes | General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. To prevent short circuits, all wire bridges on the following I/O cards are to be separated. There may not be any voltage supply at the front adapter. 6ES7 331-1KF01-0AB0 6ES7 331-1KF02-0AB0 6ES7 331-7NF00-0AB0 6ES7 331-7NF10-0AB0 6ES7 331-7PF01-0AB0 6ES7 331-7PF11-0AB0 6ES7 332-5HF00-0AB0 6ES7 350-2AH01-0AE0 6ES7 357-4AH01-0AE0 Digital I/O cards Thanks to the existing wire bridge upon delivery, the input and output bytes are non-isolated. |
| ECLASS | ECLASS-11.0: 27242292 ECLASS-12.0: 27242292 ECLASS-13.0: 27242292 |
| ETIM | ETIM 9.0: EC002584 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Description other products
