Not available 
| Product properties | Product type: Front adapter Product family: VARIOFACE Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Operating voltage (AC): ⤠30 VAC Operating voltage (DC): ⤠60 VDC Nominal operating mode: 100% operating factor Current (per branch): ⤠1 A Current (Voltage supply via IDC/FLK): ⤠2 A Current (Voltage supply via spade connection): ⤠8 A Air clearances and creepage distances Rated insulation voltage: 63 V Rated surge voltage: 0.6 kV (1.2/50 üs) Supported controller SIEMENS S7-400 Suitable I/O card: 6ES7421-1BL01-0AA0 6ES7422-1BL00-0AA0 6ES7422-7BL00-0AB0 Supported controller SIEMENS S7-400â Note: Only in conjunction with VIP-2/SC/FLK50/S7/A-S400, Item No. 2322359 VIP-2/PT/FLK50/S7/A-S400, Item No. 2904289 all DR wire bridges on the adapter must be disconnected. Suitable I/O card: 6ES7421-7BH01-0AB0 6ES7421-7DH00-0AA0 |
| Connection data | Connection1 (control level) Connection method: Plug-in connection Number of positions: 48 Connection2 (field level) Connection in acc. with standard: IEC 60603-13 Connection method: IDC/FLK pin strip Number of connections: 1 Number of positions: 50 Insertion/withdrawal cycles: > 50 Pitch: 2.54 mm Connection3 (supply) Connection method: Spade connection Number of positions: 5 Note: 2,8 x 0,8 |
| Dimensions | Item dimensions Width: 24.2 mm Height: 273.5 mm Depth: 67.6 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection (Module): IP00 Degree of protection (Installation location): ⥠IP54 Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 70°C Altitude: ⤠2000 m |
| Standards and regulations | Air clearances and creepage distances Standards/regulations: ENIEC 60664-1 |
| Mounting | Mounting type: Plug-in mounting Mounting position: any |
| Notes | General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. For I/O cards 6ES7 421-1BL01-0AA0, 6ES7 422-1BL00-0AA0, and 6ES7 422-7BL00-0AB0: Thanks to the wire bridges that are supplied as standard, the input and output bytes are non-isolated. For I/O cards 6ES7 421-7BH01-0AB0 and 6ES7 421-7DH00-0AB0: Only operate in conjunction with VIP-2/SC/FLK50/S7/A-S400 (Item No. 2322359) or VIP-2/PT/FLK50/S7/A-S400 (Item No. 2904289). All wire bridges on the adapter must be disconnected. |
| ECLASS | ECLASS-11.0: 27242292 ECLASS-12.0: 27242292 ECLASS-13.0: 27242292 |
| ETIM | ETIM 9.0: EC002584 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Description other products
