Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2294908
PHOENIX CONTACT 2294908
PHOENIX CONTACTNot available

FLKM 50-PA-S400(3-48) - Front adapter

VARIOFACE front adapter, for Siemens SIMATIC® S7-400, only analog
Product Code: 2294908
Partner cod.: 2294908
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesProduct type: Front adapter
Product family: VARIOFACE
Insulation characteristics
Insulation: Functional insulation
Insulation characteristics: Air clearances and creepage distances
Insulation: Functional insulation
Overvoltage category: II
Pollution degree: 2
Electrical propertiesOperating voltage (AC): ≤ 30 VAC
Operating voltage (DC): ≤ 60 VDC
Nominal operating mode: 100% operating factor
Current (per branch): ≤ 1 A
Air clearances and creepage distances
Rated insulation voltage: 63 V
Rated surge voltage: 0.6 kV (1.2/50 μs)
Supported controller SIEMENS S7-400
Suitable I/O card: 6ES7431-0HH0-0AB0
6ES7431-1KF00-0AB0
6ES7431-1KF10-0AB0
6ES7431-1KF20-0AB0
6ES7431-7KF00-0AB0
6ES7431-7KF10-0AB0
6ES7431-7QH00-0AB0
6ES7432-1HF00-0AB0
Connection dataConnection1 (control level)
Connection method: Plug-in connection
Number of positions: 48
Connection2 (field level)
Connection in acc. with standard: IEC 60603-13
Connection method: IDC/FLK pin strip
Number of connections: 1
Number of positions: 50
Insertion/withdrawal cycles: > 50
Pitch: 2.54 mm
DimensionsItem dimensions
Width: 24.2 mm
Height: 273.5 mm
Depth: 67.6 mm
Environmental and real-life conditionsAmbient conditions
Degree of protection (Module): IP20
Degree of protection (Installation location): ≥ IP54
Ambient temperature (operation): -20°C ... 50°C
Ambient temperature (storage/transport): -20°C ... 70°C
Altitude: ≤ 2000 m
Standards and regulationsAir clearances and creepage distances
Standards/regulations: ENIEC 60664-1
MountingMounting type: Plug-in mounting
Mounting position: any
NotesGeneral: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
All analog I/O cards may only be operated in conjunction with one of the following modules:
VIP-3/SC/FLK50, Item No. 2315081
VIP-3/PT/FLK50, Item No. 2903794
FLKM 50/KDS 3-MT/PPA/AN/PLC, Item No. 2291587
Technical Specs
ECLASSECLASS-11.0: 27242292
ECLASS-12.0: 27242292
ECLASS-13.0: 27242292
ETIMETIM 9.0: EC002584
UNSPSCUNSPSC 21.0: 32151600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00005.pdf

Manufacturer_declaration_18070.pdf

Product_information_00033.pdf

Technical_drawing_36961.pdf