2297109 PHOENIX CONTACT - Technology Bsa

ELR W3- 24DC/500AC- 2I-BR - Hybrid motor starter

Hybrid motor starter for reversing 3~AC motors up to 550VAC, with 24VDC input, 2.4A output current, adjustable overload shutdown, and limited phase failure detection

Product Code: 2297109

Partner cod.: 2297109

PHOENIX CONTACT

Product properties	Product type: Hybrid motor starters Product family: CONTACTRON Operating mode: 100% operating factor
Electrical properties	Number of phases: 3 Motor starter type: Reversing starter Switching frequency: Ã¢¤ 2 Hz (Load-dependent) Maximum power dissipation: 3.3 W Minimum power dissipation: 1.1 W Supply Rated control circuit supply voltage U_S: 24 VDC Control supply voltage range: 19.2 VDC ... 30 VDC Rated control supply current I_S: 40 mA Protective circuit: Surge protection Reverse polarity protection Insulation characteristics Rated insulation voltage: 500 V Rated surge voltage: 6 kV Overvoltage category: III Degree of pollution: 2 Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit: Safe isolation (IEC 60947-1) at operating voltage Ã¢¤ 300 V AC Basic insulation (IEC 60947-1) at operating voltage 300VAC...500VAC Safe isolation (IEC 60947-1) in the auxiliary circuit Ã¢¤ 300 V AC
Input data	Control Input name: Control input right/left Rated actuating voltage U_C: 24 VDC Triggering voltage range: 19.2 VDC ... 30 VDC Rated actuating current I_C: 5 mA (Input type 1) Switching threshold: 9.6 V (Ã¢0Ã¢ signal) 19.2 V (Ã¢1Ã¢ signal) Typical response time: < 35 ms Typical turn-off time: < 40 ms Protective circuit: Reverse polarity protection
Output data	AC output Rated operating voltage U_e: 500 VAC Operating voltage range: 42 VAC ... 550 VAC Rated operating current I_e: 2.4 A (AC-51) 2.4 A (AC-53a) Mains frequency: 50/60 Hz Load current range: 180 mA ... 2.4 A (see to derating) Trigger characteristic in acc. with IEC 60947-4-2: Class 10A Cooling time: 20 min. (for auto reset) Leakage current: 0 mA Protective circuit: Surge protection Acknowledge output Note: Confirmation 01: floating changeover contact Contact switching type: 1changeover contact Switching capacity in accordance with IEC 60947-5-1: 3 A (230 V, AC15) 2 A (24V, DC13)
Connection data	Control circuits Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm 5 lb_f-in. ... 7 lb_f-in. Load circuit Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm 5 lb_f-in. ... 7 lb_f-in.
Signaling	Status display: Yellow LED Operating voltage display: Green LED Error indication: Red LED
Dimensions	Width: 22.5 mm Height: 107 mm Depth: 114 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (observe derating) Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m
Approvals	UKCA Certificate: UKCA-compliant
Standards and regulations	Standards/regulations Standards/regulations: IEC 60947-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: can be aligned with spacing: see derating Mounting position: Vertical (horizontal DIN rail)