Not available 
| Product properties | Product type: Front adapter Product family: VARIOFACE Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Operating voltage (AC): ⤠30 VAC Operating voltage (DC): ⤠60 VDC Nominal operating mode: 100% operating factor Current (per branch): ⤠1 A Current (Voltage supply via IDC/FLK): ⤠2 A Current (Voltage supply via spade connection): ⤠8 A Air clearances and creepage distances Rated insulation voltage: 63 V Rated surge voltage: 0.6 kV (1.2/50 üs) Supported controller SIEMENS S7-300 / ET 200 M Suitable I/O card: 6ES7321-1BH50-0AA0 6ES7321-7BH01-0AB0 6ES7321-1BH02-0AA0 6ES7321-1BH10-0AA0 6ES7322-1BH01-0AA0 6ES7322-1BH10-0AA0 6ES7322-8BF00-0AB0 6ES7323-1BH01-0AA0 6ES7331-7HF01-0AB0 6ES7331-7KF02-0AB0 6ES7331-7KB02-0AB0 6ES7331-7TF01-0AB0 6ES7332-5HD01-0AB0 6ES7332-5HB01-0AB0 6ES7332-7ND02-0AB0 6ES7332-8TF01-0AB0 6ES7334-0CE01-0AA0 6ES7334-0KE00-0AB0 6ES7335-7HG01-0AB0 6ES7338-4BC01-0AB0 6ES7350-1AH03-0AE0 6ES7351-1AH01-0AE0 6ES7352-1AH02-0AE0 6ES7353-1AH01-0AE0 6ES7354-1AH01-0AE0 6ES7355-0VH10-0AE0 6ES7355-1VH10-0AE0 |
| Connection data | Connection1 (control level) Connection method: Plug-in connection Number of positions: 20 Connection2 (field level) Connection in acc. with standard: IEC 60603-13 Connection method: IDC/FLK pin strip Number of connections: 2 Number of positions: 14 Insertion/withdrawal cycles: > 50 Pitch: 2.54 mm Connection3 (supply) Connection method: Spade connection Number of positions: 4 Note: 2,8 x 0,8 |
| Dimensions | Item dimensions Width: 22.5 mm Height: 117 mm Depth: 19.39 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection (Module): IP00 Degree of protection (Installation location): ⥠IP54 Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 50°C Altitude: ⤠2000 m |
| Standards and regulations | Air clearances and creepage distances Standards/regulations: ENIEC 60664-1 |
| Mounting | Mounting type: Plug-in mounting Mounting position: any |
| Notes | General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. To prevent short circuits, all wire bridges on the following I/O cards are to be separated. There may not be any voltage supply at the front adapter. 6ES7 321-1BH50-0AA0 6ES7 321-7BH01-0AB0 6ES7 322-8BF00-0AB0 6ES7 331-7KF02-0AB0 6ES7 331-7HF01-0AB0 6ES7 331-7KB02-0AB0 6ES7 331-7TF01-0AB0 6ES7 332-5HD01-0AB0 6ES7 332-5HB01-0AB0 6ES7 332-7ND02-0AB0 6ES7 334-0CE01-0AA0 6ES7 334-0KE00-0AB0 6ES7 335-7HG01-0AB0 6ES7 338-4BC01-0AB0 6ES7 350-1AH03-0AE0 6ES7 351-1AH01-0AE0 6ES7 352-1AH02-0AE0 6ES7 353-1AH01-0AE0 6ES7 354-1AH01-0AE0 6ES7 355-0VH10-0AE0 6ES7 355-1VH10-0AE0 |
| ECLASS | ECLASS-11.0: 27242292 ECLASS-12.0: 27242292 ECLASS-13.0: 27242292 |
| ETIM | ETIM 9.0: EC002584 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Description other products
