2310235 PHOENIX CONTACT - Technology Bsa

UM-2KS50/32-MR/21/ADV551/SO179 - Active module

32-channel output relay module (one N/O contact or one N/C contact) with a screw connection and a fuse (1 A). The voltage supply and 50-pos. system connector are designed redundantly. Suitable for the Yokogawa ADV551 and ADV561 cards.

Product Code: 2310235

Partner cod.: 2310235

PHOENIX CONTACT

Product properties	Product type: Interface module No. of channels: 32 Operating mode: 100% operating factor Mechanical service life: 3x 10⁷ cycles Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Functional insulation Overvoltage category: II Pollution degree: 2
Electrical properties	No. of channels: 32 Air clearances and creepage distances between the power circuits Rated insulation voltage: 50 V Rated surge voltage: 0.5 kV Supported controller YOKOGAWA CS3000 CentumVP Suitable I/O card: ADV551 ADV561 Supported controller YOKOGAWA STARDOM Suitable I/O card: NFDV551 NFDV561
Input data	Nominal input voltage U_N: 24 VDC (max. current per branch: 18 mA, max. total current: 1 A) Input voltage range in reference to U_N: 0.9 ... 1.1 Input voltage range: 21.6 VDC ... 26.4 VDC Typical input current at U_N: 18 mA Typical response time: 8 ms Typical release time: 10 ms Protective circuit: Free running; Freewheeling diode Reverse polarity protection; Polarity protection diode Operating voltage display: Green LED Status display/channel: Yellow LED
Output data	Switching Contact switching type: Single contact, 1 N/O contact or 1 N/C contact Type of switch contact: Single contact Contact material: AgNi, 5 µm hard gold-plated Maximum switching voltage: 24 V AC/DC Minimum switching voltage: 12 VDC (at 10 mA) Limiting continuous current: 1 A (per channel, power supply 8A) Min. switching current: 10 mA
Connection data	Field level Connection method: Screw connection Screw thread: M3 Number of connections: 35 Number of positions: 3 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Controller level Connection method: Yokogawa KS-compatible Stripping length: 8 mm Number of connections: 2 Number of positions: 50 Note: Usable system cables: Phoenix Contact YUC50, Yokogawa AKB331 Tightening torque: 0.5 Nm
Signaling	Status display present: Yes
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/be4e3f7d6846c44c887ac5a311471f8c/-S204x204-FJPG Width: 519.5 mm Height: 127.5 mm Depth: 60.5 mm
Material specifications	Housing insulation material: PVC, side panel PA non-reinforced,
Environmental and real-life conditions	Ambient conditions Degree of protection: IP00 Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 70°C Altitude: Ã¢¤ 2000 m
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: DINEN50178
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any
Notes	General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.