2313452 PHOENIX CONTACT - Technology Bsa

FL COMSERVER UNI 232/422/485 - Interface converters

Second generation FL COMSERVER UNI..., serial device server for converting a serial 232/422/485 interface to Ethernet, supports TCP, UDP, Modbus gateway, and PPP applications, incl. COM port redirector software and user documentation

Product Code: 2313452

Partner cod.: 2313452

PHOENIX CONTACT

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area Utilization restrictionÃ¢ CCCex note: Use in potentially explosive areas is not permitted in China.
Product properties	Product type: Interface converter Application: TCP, UDP, Modbus gateway, PPP MTTF: 2013 Years (SN29500 standard, temperature25°C, operating cycle21%) 879 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 359 Years (SN29500 standard, temperature40°C, operating cycle100%) MTBF: 666 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 179 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
System properties	System requirements Supported browsers: Netscape Communicator versions 4.5 and up or Internet Explorer versions 5.5 and up
Electrical properties	Electrical isolation: VCC // Ethernet // Serial Maximum power dissipation for nominal condition: 2.4 W Test voltage data interface/data interface: 1.5 kV_rms (50Hz, 1min.) Test voltage data interface/power supply: 1.5 kV_rms (50Hz, 1min.) Supply Supply voltage range: 19.2 V AC/DC ... 28.8 V AC/DC (via pluggable COMBICON screw terminal block) 22.8 VDC ... 25.2 VDC (as an alternative or redundant, via backplane bus contact and system current supply) Typical current consumption: 100 mA (24VDC) Function Management: Web-based management, SNMP, emergency exit with Telnet and serial Status and diagnostic indicators: LEDs: UL (logic voltage), TD + RD (data activity serial), FD (full duplex), 100 (100 Mbps mode), Link (Ethernet), Activity (Ethernet), ERR (error)
Connection data	Supply Tightening torque: 0.56 Nm ... 0.79 Nm
Interfaces	Signal: Ethernet Modbus Web server: yes Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 Serial transmission speed: 10/100 Mbps, auto negotiation Connection method: RJ45 jack, shielded No. of channels: 1 Transmission length: Ã¢¤ 100 m (shielded twisted pair) Protocols supported: TCP/IP, UDP, Modbus (TCP, RTU/ASCII), PPP Auxiliary protocols: ARP, DHCP, BOOTP, SNMP, RIP, RARP, HTTP, TFTP, ICMP Data flow control/protocols: Modbus/TCP Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN66259-1 Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4 kbps Connection method: D-SUB9 plug Pin assignment: DTE/DCE switchover via web-based management Transmission length: 15 m File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity Data flow control/protocols: Software handshake, Xon/Xoff, or hardware handshake RTS/CTS // 3964 R compatible, Modbus RTU/ASCII Data: RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1 Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4; 500; 1000 kbps Connection method: Plug-in/screw connection via COMBICON Transmission length: Ã¢¤ 1200 m Termination resistor: 390 Ã© (configurable) 180 Ã© 390 Ã© File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity Data flow control/protocols: Automatic control Data: RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485 2-wire Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4; 500; 1000 kbps Connection method: Plug-in/screw connection via COMBICON Termination resistor: 390 Ã© 180 Ã© 390 Ã© (configurable) File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity Data flow control/protocols: Automatic control
Dimensions	Width: 22.5 mm Height: 99 mm Depth: 116 mm
Material specifications	Material: PA 6.6-FR
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C -20°C ... 60°C (in acc. with UL) Ambient temperature (storage/transport): -25°C ... 70°C Altitude: Ã¢¤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Approvals	CE Certificate: CE-compliant EAC Identification: EAC ATEX Identification: Ã¯ II 3G Ex nA IIC T4 Gc X Note: Please follow the special installation instructions in the documentation! UL, USA/Canada Identification: 508 Listed Class I, Div. 2, Groups A, B, C, D UL, USA Identification: Class I, Zone 2, AEx nA IIC T5 UL, Canada Identification: Class I, Zone 2, Ex nA IIC T5 Gc X KC approval for South Korea Certificate: MSIP-REI-PCK-2313452 Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A
EMC data	Noise immunity: EN 61000-6-2:2005 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV Discharge in air: ± 8 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: 2 kV (5kHz) Signal: 1 kV (5kHz) Comments: Criterion A Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Input: 2 kV Signal: 1 kV Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN55032 Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
Standards and regulations	Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 Standards/regulations: EN50121-4
Mounting	Mounting type: DIN rail mounting