Industrial Automation
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area Utilization restriction​ CCCex note: Use in potentially explosive areas is not permitted in China. |
Product properties | Product type: Media converter MTTF: 831 Years (SN29500 standard, temperature25°C, operating cycle21%) 378 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 155 Years (SN29500 standard, temperature40°C, operating cycle100%) MTBF: 253 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 38 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) |
Electrical properties | Electrical isolation: VCC // CAN Maximum power dissipation for nominal condition: 3.12 W Test voltage data interface/power supply: 1.5 kVrms (50Hz, 1min.) Supply Supply voltage range: 11 VDC ... 30 VDC (via pluggable COMBICON screw terminal block) Nominal supply voltage: 24 VDC Typical current consumption: 130 mA (24VDC) Max. current consumption: ≤ 2 A (For operation in a joining station, via the DIN rail connector) Function Status and diagnostic indicators: LEDs: VCC (supply voltage), NET (Mod/Net status), FO signal (fiber optic signal quality), ERR (broken fiber, fiber optic) |
Output data | Switching Output name: Relay output Number of outputs: 1 Contact switching type: N/O contact Minimum switching voltage: 11 VDC Maximum switching voltage: 30 VDC Limiting continuous current: 500 mA |
Connection data | Supply Tightening torque: 0.56 Nm ... 0.79 Nm |
Interfaces | Bit distortion, input: ± 35 % (permitted) Bit distortion, output: < 6.25 % Signal: CAN CANopen® DeviceNet™ Data: optical FO No. of channels: 1 Transmit capacity, minimum: -17.6 dBm (50/125µm) -14.6 dBm (62,5/125 µm) -4 dBm (200/230µm) Transmission protocol: Protocol transparent for CAN interface Connection method: B-FOC (ST®) Wavelength: 850 nm Minimum receiver sensitivity: -29 dBm (50/125µm) -29 dBm (62,5/125 µm) -28.1 dBm (200/230µm) Transmission medium: PCF fiber Multi-mode fiberglass Data: CAN interface, in accordance with ISO/IS11898 for DeviceNet™, CAN, CANopen Transmission speed: ≤ 1 Mbps (Configurable via DIP switches) Connection method: COMBICON plug-in screw terminal block No. of channels: 2 (CAN_High / CAN_Low) Transmission length: ≤ 5000 m (Dependent on the data rate and the protocol used) Number of bus devices: ≤ 64 (per potential segment) ≤ 63 (DeviceNet™, can be addressed logically) ≤ 128 (CANopen®, can be addressed logically) Termination resistor: 124 Ω (Integrated and ready to be switched) Single conductor/terminal point, rigid: 0.2 mm² ... 2.5 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 2.5 mm² Max. AWG conductor cross section, flexible: 14 Min. AWG conductor cross section, flexible: 24 Single-wire/terminal point, rigid AWG max.: 14 Single-wire/terminal point, rigid AWG min.: 24 Transmission medium: 2-wire twisted pair, shielded Transmission method: CSMA/CA File format/coding: Bit stuffing, NRZ |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/cf3065ca61c1a143ba6a4ee4f532e49a/-S204x204-FJPG Width: 35 mm Height: 102 mm Depth: 119 mm |
Material specifications | Material: PA 6.6-FR |
Cable/line | FO cable Fiber types: 200/230µm 50/125 µm 62.5/125 µm PCF fiber Fiberglass |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 30 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant EAC Identification: EAC ATEX Identification: ï˜ II 3 G Ex nA IIC T4 Gc X Note: Please follow the special installation instructions in the documentation! UL, USA/Canada Identification: 508 Listed Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A Shipbuilding Identification: DNV GL DNV GL data Temperature: B Humidity: A Vibration: A EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board |
EMC data | Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 55011 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic discharge​ Contact discharge: ± 6 kV Discharge in air: ± 8 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF field​ Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)​ Input: ± 2 kV Signal: ± 2 kV Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)​ Input: ± 0.5 kV Signal: ± 1 kV Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interference​ Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN55011 Comments: Class A, industrial applications Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
Standards and regulations | Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 19170411 ECLASS-12.0: 19170411 ECLASS-13.0: 19170411 |
ETIM | ETIM 9.0: EC001467 |
UNSPSC | UNSPSC 21.0: 43201500 |
Description other products