Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2316307
PHOENIX CONTACTNot available

FB-6SP - Device coupler

Device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for six spurs connected to fieldbus end devices.
Product Code: 2316307
Partner cod.: 2316307
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
NotesUtilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product propertiesProduct type: Device coupler
MTTF: 1256 Years (25 degrees C)
Electrical propertiesSupply
Supply voltage range: 10.5 VDC ... 32 VDC (input on trunk line side)
Typical current consumption: 4.8 mA
Connection dataSupply
Conductor cross section, flexible: 2.50 mm² ... 0.20 mm²
Conductor cross section, rigid: 2.50 mm² ... 0.20 mm²
Conductor cross section, flexible [AWG]: 24 ... 12
Conductor cross section AWG: 24 ... 12
Ex dataSafety data
Input voltage Ui: 32 V (IIB (C/D))
24 V (IIC (A/B))
17.5 V (FISCO)
Inductance Li: 4 µH
Capacitance Ci: 0 µF
Max. output voltage Uo: Uin (spur)
Max. output current Io: 56 mA (spur)
Max. output power Po: 1.792 W
Current consumption: 4.8 mA (Maximum, no load)
0.34 A (maximum trunk current)
IIC/IIB (spur): Max. external inductivity Lo / Max. external capacitance Co: / 80 nF
0.26 mH
InterfacesSignal: FOUNDATION Fieldbus
PROFIBUS
Data: Foundation Fieldbus and PROFIBUS PA Segment
Connection method: Pluggable COMBICON screw connection for each spur
No. of channels: 6
Termination resistor: 100 Ω, external removable plug included
100 Ω (external removable plug)
Conductor cross section flexible max.: 2.5 mm²
Conductor cross section flexible min.: 0.2 mm²
Conductor cross section, rigid max.: 2.5 mm²
Conductor cross section, rigid min.: 0.2 mm²
Conductor cross section AWG max.: 12
Conductor cross section AWG min.: 24
Output nominal voltage: ≤ 32 V (each spur)
Output current: 38 mA
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e587d46382301e429612a08d190792bb/-S204x204-FJPG
Width: 148.2 mm
Height: 112.5 mm
Depth: 83.5 mm
Material specificationsFlammability rating according to UL 94: V0
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -50°C ... 90°C
Ambient temperature (storage/transport): -50°C ... 90°C
Altitude: 2000 m
Max. permissible relative humidity (operation): < 95 % (non-condensing)
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Shock: 30g, 11ms
Vibration (operation): 5g, 10Hz ... 150Hz
ApprovalsATEX
Identification:  II 3(3)G Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs
Ex nA [nL] IIC T4 Gc
Ex ic IIC T4 Gc, FISCO ic
Certificate: Sira 13ATEX4247X
IECEx
Identification: Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs
Ex nA [nL] IIC T4 Gc
Ex ic IIC T4 Gc, FISCO ic
Certificate: IECEx SIR 13.0089X
CSA, USA/Canada
Identification: Class I, Div. 2, Groups A, B, C, D
Ex nA [nL] IIC T4 Gc
Class I, Zone 2, AEx nA [nC] IIC T4 Gc
UL, USA
Identification: Class I, Zone 2
AEx nA [ic] IIC T4, Entity/FISCO spurs
Ex nA [ic] IIC T4 Gc
Class I, Div. 2, Groups A, B, C, D T4
UKCAEx(UKEX)
Identification:  II 3(3)G Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs
Ex nA [nL] IIC T4 Gc
Ex ic IIC T4 Gc, FISCO ic
Certificate: PxCAI22UKEx2316307X
CCC
Identification: Ex ec [ic] IIC T4 Gc
Ex ic IIC T4 Gc
Standards and regulationsStandards
Standards/regulations: EN60079-0:2011, EN60079-11:2012, EN60079-15:2005, EN60079-15:2010
IEC 60079-0:2011, IEC 60079-11:2011, IEC 60079-15:2005, IEC 60079-15:2010
Standards/regulations
Standards/regulations: Ring wave noise immunity in acc. with IEC 61000-4-12
Standards/regulations​
Standards/regulations: Dry heat in acc. with IEC 61131-2
Standards/regulations​​
Standards/regulations: Damp heat in acc. with IEC 61131-2
Standards/regulations​​​
Standards/regulations: Shock and vibration in acc. with EN 61131-2 and EN 50178
IEC 61158-2
MountingMounting position: On horizontal and vertical DIN rail NS 35 in acc. with EN 60715
Technical Specs
ECLASSECLASS-11.0: 27242610
ECLASS-12.0: 27242610
ECLASS-13.0: 27242610
ETIMETIM 9.0: EC001600
UNSPSCUNSPSC 21.0: 32151600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00056.pdf

Approvals_00057.pdf

Approvals_00419.pdf

Approvals_00884.pdf

Approvals_01191.pdf

Approvals_01192.pdf

Certification_00154.pdf

Certification_00155.pdf

Data_sheet_03086.pdf

Manufacturer_declaration_00074.pdf

Manufacturer_declaration_05549.pdf

Manufacturer_declaration_14253.pdf

Package_slip_00026.pdf

Technical_drawing_37345.pdf