| Input data | DC operation
Nominal input voltage range: 12 VDC ... 24 VDC
Input voltage range: 10 VDC ... 32 VDC (> 10.5 V DC start)
Wide-range input: yes
Input voltage range DC: 10 VDC ... 32 VDC (> 10.5 V DC start)
Voltage type of supply voltage: DC
Inrush current: < 10 A (typical)
Inrush current integral (I2t): 0.2 A2s
Frequency range DC: 0 Hz
Mains buffering time: typ. 4 ms (12VDC)
typ. 18 ms (24VDC)
Current consumption: 2.3 A (12VDC)
1.1 A (24VDC)
Typical response time: < 0.5 s
Input fuse: 6.3 A (slow-blow, internal)
|
| Output data | Efficiency: > 88 % (at 24 V DC and nominal values)
Output characteristic: U/I
Nominal output voltage: 12 VDC ±1%
Setting range of the output voltage (USet): 5 VDC ... 15 VDC
Nominal output current (IN): 2 A (-25°C...60°C)
Derating: 60°C ... 70°C (2.5%/K)
Feedback voltage resistance: 30 VDC
Protection against overvoltage at the output (OVP): < 25 VDC
Residual ripple: < 20 mVPP (20MHz)
Output power: 24 W
Peak switching voltages nominal load: < 10 mVPP (20MHz)
Maximum no-load power dissipation: < 1 W
Power loss nominal load max.: < 4.2 W
Connection in parallel: yes, for assembling redundant systems and increasing efficiency
Connection in series: yes
Signal: DC OK active
Output description: UOUT > 0.9 x UN: High signal
Continuous load current: ⤠20 mA
|
| Connection data | Input
Connection method: Pluggable screw connection
Conductor cross section, rigid min.: 0.2 mm²
Conductor cross section, rigid max.: 2.5 mm²
Conductor cross section flexible min.: 0.2 mm²
Conductor cross section flexible max.: 2.5 mm²
Conductor cross section AWG min.: 24
Conductor cross section AWG max.: 14
Stripping length: 7 mm
Screw thread: M3
Tightening torque, min: 0.5 Nm
Tightening torque max: 0.6 Nm
Output
Connection method: Pluggable screw connection
Conductor cross section, rigid min.: 0.2 mm²
Conductor cross section, rigid max.: 2.5 mm²
Conductor cross section flexible min.: 0.2 mm²
Conductor cross section flexible max.: 2.5 mm²
Conductor cross section AWG min.: 24
Conductor cross section AWG max.: 14
Stripping length: 7 mm
Screw thread: M3
Tightening torque, min: 0.5 Nm
Tightening torque max: 0.6 Nm
Signal
Conductor cross section, rigid min.: 0.2 mm²
Conductor cross section, rigid max.: 2.5 mm²
Conductor cross section flexible min.: 0.2 mm²
Conductor cross section flexible max.: 2.5 mm²
Conductor cross section AWG min.: 24
Conductor cross section AWG max.: 14
Screw thread: M3
Tightening torque, min: 0.5 Nm
Tightening torque max: 0.6 Nm
|
| Signaling | Types of signaling: LED
Active switching output
Signal output: DC OK active
Status display: "DC OK" LED green
Note on status display: UOUT > 0.9 x UN: LED ON
LED on
Color: green
|
| Electrical properties | Number of phases: 1.00
Insulation voltage input/output: 1.5 kV (type test)
1 kV (routine test)
|
| Product properties | Product type: DC/DC converters
MTBF (IEC 61709, SN 29500): > 2072000 h (40°C)
Insulation characteristics
Protection class: III
Degree of pollution: 2
|
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c55c98af2ff7a54c922fa2c4c1942256/-S204x204-FJPG
Width: 22.5 mm
Height: 99 mm
Depth: 107 mm
Installation dimensions
Installation distance right/left: 0 mm / 0 mm (⤠70°C)
Installation distance top/bottom: 50 mm / 50 mm (⤠70°C)
|
| Mounting | Assembly instructions: alignable: horizontally 0mm, vertically 50mm
Mounting position: horizontal DIN rail NS 35, EN 60715
With protective coating: No
|
| Material specifications | Housing material: Plastic
Polyamide (PA)
Type of housing: Polyamide PA, color: green
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20
Ambient temperature (operation): -25°C ... 70°C (> +60°C derating)
Ambient temperature (storage/transport): -40°C ... 85°C
Climatic class: 3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation): ⤠95 % (At +25°C, non-condensing)
Shock: 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation): < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz...150Hz, 2.3g
|
| Standards and regulations | Rail applications: EN50121-4
Standard â Electronic equipment for use in electrical power installations and their assembly into electrical power installations: EN50178/VDE0160 (PELV)
Standard - Electrical safety: EN60950-1/VDE0805 (SELV)
Standard - Safe isolation: DINVDE0100-410
DINVDE0106-101
|
| Approvals | CSA: CSA-C22.2 No.107.1-01
UL approvals: UL/C-UL listed UL508
UL/C-UL Recognized UL60950-1
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
|
| EMC data | Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission: EN61000-6-3
EN61000-6-4
EMC requirements for noise immunity: EN61000-6-1
EN61000-6-2
Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU
Noise emission: EN 55011 (EN 55022)
Electrostatic discharge
Standards/regulations: EN61000-4-2
Housing: > Level 3
Electrostatic dischargeâ
Contact discharge: 8 kV (Contact discharge)
Discharge in air: 8 kV (Air discharge)
Comments: Criterion B
Electromagnetic HF field
Standards/regulations: EN61000-4-3
Electromagnetic HF fieldâ
Frequency range: 80 MHz ... 3 GHz
Test field strength: 10 V/m
Comments: Criterion A
Fast transients (burst)
Standards/regulations: EN61000-4-4
Fast transients (burst)â
Input: 4 kV (level 4 - asymmetrical: conductor to ground)
Output: 2 kV (level 3 - asymmetrical: conductor to ground)
Signal: 1 kV (Level 2 - asymmetrical cable to ground)
Comments: Criterion B
Surge voltage load (surge)
Standards/regulations: EN61000-4-5
Conducted interference
Standards/regulations: EN61000-4-6
Conducted interferenceâ
Input/Output: Level 3
Frequency range: 0.15 MHz ... 80 MHz (10V)
Voltage dips
Standards/regulations: EN61000-4-11
Emitted interference
Standards/regulations: EN61000-6-3
Radio interference voltage in acc. with EN 55011: EN55011 (EN55022) ClassB, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011: EN 55011 (EN 55022) Class B, area of application: Industry and residential
|
Not available 
