Industrial Automation
QUINT-UPS/ 1AC/ 1AC/500VA - Uninterruptible power supply
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Input data | AC operation Input voltage: 240 VAC 100 VAC 120 VAC -20%/+15% 230 VAC -20%/+15% Nominal input voltage range: 100 VAC ... 240 VAC Input voltage range: 184 VAC ... 264 VAC 96 VAC ... 138 VAC 96 VAC ... 264 VAC Input voltage range AC: 196 VAC ... 264 VAC 102 VAC ... 138 VAC 96 VAC ... 264 VAC Voltage type of supply voltage: AC Nominal frequency: 50 Hz ... 60 Hz AC frequency range: 45 Hz ... 65 Hz Buffer period: 1 h (38 AH) Current consumption: 2.2 A (230 V AC) 0.18 A (230 V AC) 0.8 A (230 V AC) 3.7 A (230 V AC) 4.3 A (120VAC) 0.35 A (120VAC) 1.3 A (120VAC) 6.8 A (120VAC) Fixed backup threshold: Configurable, 10% deviation from nominal input voltage set by default Variable connect threshold: Can be configured using UPS-CONF software Power factor (cos phi): 0.8 Device mains fuse: 10 A Permissible backup fuse: B16 230 V AC 20A 120VAC, Listed breaker Digital Control Low-Active (configurable) Battery-operated start 120 VAC Default: Plug-in bridge (output +24 V DC, 30 mA to input A1) Battery-operated start 230VAC Default: Plug-in bridge (output +24 V DC, 30 mA to input A2) |
Output data | Classification according to IEC 62040-3: VFD-SS-311 Efficiency: > 98 % (Mains operation) > 98 % (120VAC) > 86 % (Battery operation) Nominal output voltage: 120 VAC 230 VAC Output voltage range: 96 VAC ... 144 VAC 184 VAC ... 264 VAC Form of output voltage: Pure sine Nominal output current (IN): 4.3 A (120VAC, -25°C...50°C) 2.2 A (230 V AC, -25°C ... 40°C) Output current limit: 5.2 A (120VAC) 2.7 A (230 V AC) POWER BOOST (IBoost): 5.2 A (120VAC, -25°C...40°C) 2.7 A (230 V AC, -25°C ... 40°C) Bridging time: 3600 s Derating: > 50°C ... 70°C (2.5%/K) UPS connection in parallel: no UPS connection in series: no Output power: 516 W Apparent power: 500 VA Nominal power: 400 W Crest factor: 2.8 Switch-over time: < 10 ms Connection in parallel: no Connection in series: No Mains operation Nominal output voltage: 120 VAC 230 VAC Output voltage range: 102 VAC ... 138 VAC 196 VAC ... 264 VAC Nominal output current (IN): 4.3 A (120VAC) 2.2 A (230 V AC) POWER BOOST (IBoost): 5.2 A 2.7 A Permissible backup fuse: AC: 1 x circuit breaker - recommended fuse Battery operation Nominal output voltage: 120 VAC 230 VAC Nominal output current (IN): 2.2 A (230 V AC) 4.3 A (120VAC) POWER BOOST (IBoost): 2.7 A (230 V AC) 5.2 A (120VAC) Permissible backup fuse: 25A in parallel operation of 3.5AH and 60WH 50A in parallel operation of 7.2AH, 12AH, and 38AH Buffer period: 10 min. (400 W / 7,2 Ah) Signal: Alarm Maximum switching voltage: ⤠30 VDC Output voltage: 24 V (SELV) Continuous load current: ⤠30 mA Signal: Battery mode Maximum switching voltage: ⤠30 VDC Output voltage: 24 V (SELV) Continuous load current: ⤠30 mA Signal: POWER BOOST Maximum switching voltage: ⤠30 VDC Output voltage: 24 V (SELV) Continuous load current: ⤠30 mA |
Energy storage | Nominal voltage UN: 24 VDC End-of-charge voltage: 25 VDC ... 30 VDC (temperature compensated) Charging current: 2 A Nominal capacity range: 3.4 Ah ... 114 Ah (3x38Ah) Battery presence check/time interval: 1 min. Battery presence check (cyclic): 60 s Energy storage device connection in parallel: yes,3(observe line protection) Energy storage device connection in series: no IQ technology: Yes Temperature compensation: 42 mV/K (preset) Temperature compensation (preset): -42 mV/K Permissible backup fuse: 50A Network management: Yes |
Connection data | Input Connection method: Screw connection Conductor cross section, rigid min.: 1.5 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 1.5 mm² Conductor cross section flexible max.: 4 mm² Conductor cross section AWG min.: 18 Conductor cross section AWG max.: 10 Stripping length: 8 mm Screw thread: M4 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Screw connection Conductor cross section, rigid min.: 1.5 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 1.5 mm² Conductor cross section flexible max.: 4 mm² Conductor cross section AWG min.: 18 Conductor cross section AWG max.: 10 Stripping length: 8 mm Screw thread: M4 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Signal Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 10 Stripping length: 8 mm Screw thread: M4 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm |
Interfaces | Interface: IFS (Interface system data port) MINI-USB type B |
Signaling | Types of signaling: LED Active switching outputs Interface/software Signal output: Status indicator 120 V AC Signalization designation: AC mode of operation Status display: LED Note on status display: Static to Signal output: Status indicator 230 V AC Signalization designation: AC mode of operation Status display: LED Color: green Note on status display: Static to Signal output: Transistor output, active Signalization designation: Alarm Status display: LED Color: red Note on status display: Static to Signal output: Transistor output, activeâ Signalization designation: Battery mode Status display: LED Color: yellow Note on status display: Static to Signal output: Transistor output, activeââ Signalization designation: POWER BOOST Status display: LED Color: yellow Note on status display: Static to Signal output Signalization designation: Battery charge Status display: Bar graph Color: red/green |
Electrical properties | Insulation voltage input, output / housing: 1.5 kV AC 2.1 kV DC |
Product properties | Product type: AC UPS Product family: QUINTAC-USV IQ technology: Yes MTBF (IEC 61709, SN 29500): > 240513 h (40°C) Insulation characteristics Protection class: I Life expectancy (electrolytic capacitors) Time: 184982 h |
Dimensions | Width: 125 mm Height: 130 mm Depth: 125 mm Installation dimensions Installation distance right/left: 5 mm / 5 mm Installation distance top/bottom: 50 mm / 50 mm |
Mounting | Mounting type: DIN rail mounting Assembly instructions: alignable: PN â¥50%, 5mm horizontally, 15mm next to active components, 50mm vertically alignable: PN <50%, 0mm horizontally, 40mm vertically top, 20 mm vertically bottom Mounting position: horizontal DIN rail NS 35, EN 60715 |
Material specifications | Housing material: Metal Steel sheet, zinc-plated Type of housing: Aluminum (AlMg3) Hood version: Galvanized sheet steel, free from chrome (VI) Side element version: Aluminum |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (> 50°C Derating: 2.5 %/K) Ambient temperature (storage/transport): -40°C ... 85°C Ambient temperature (start-up type tested): -40°C Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): ⤠95 % (25°C, non-condensing) Shock: 18 ms, 30g, in each space direction (according to IEC 60068-2-27) Vibration (operation): < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) 15 Hz ... 150 Hz, 2.3g tv = 90 min. |
Standards and regulations | Rail applications: EN50121-4 Standards Standard uninterruptible power supply systems: EN62040-1 Uninterruptible power supply systems Standard designation: Uninterruptible power supply systems Standards/specifications: EN62040-1 |
Approvals | UL Identification: UL/C-ULRecognizedUL1778 |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC Interference emission: Noise emission in accordance with EN62040-2 Noise immunity: Immunity in accordance with EN62040-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: 8 kV (Test Level 4) Discharge in air: 15 kV (Test Level 4) Comments: Criterion A Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 3 GHz 1 GHz ... 3 GHz 2 GHz ... 3 GHz Test field strength: 10 V/m 3 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 2 kV (Test Level 3 - asymmetrical) Output: 2 kV (Test Level 3 - asymmetrical) Signal: 2 kV (Test Level 4 - asymmetrical) Comments: Criterion A Surge voltage load (surge) Standards/regulations: EN61000-4-5 Input: 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Output: 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Comments: Criterion A Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ I/O/S: asymmetrical Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V (Test Level 3) Emitted interference Radio interference voltage: EN 62040-2 (Class C1) Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
ECLASS | ECLASS-11.0: 27040705 ECLASS-13.0: 27040705 ECLASS-12.0: 27040705 |
ETIM | ETIM 9.0: EC000382 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products