Not available 
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/eddaa3bd56eaf04098f082f3b290ceb1/-S204x204-FJPG Width: 127 mm Height: 95 mm Depth: 69 mm |
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Material specifications | Material base plate: Die-cast aluminum, corrosion-resistant Housing material: Aluminum, transparently anodized |
| Mounting | Mounting type: DIN rail mounting |
| Interfaces | Ethernet Connection method: RJ45 Transmission speed: 10/100 Mbps Transmission physics: Copper Transmission length: 100 m (per segment) Signal LEDs: Supply voltage, data transmission, error, link, activity No. of channels: 4 (RJ45 ports) |
| Product properties | Type: Stand-Alone Product type: Switch Product family: Managed Switch IRT MTTF: 362.73 Years (SN29500 standard, temperature25°C, operating cycle21%) 218.23 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 37.87 Years (SN29500 standard, temperature60°C, operating cycle100%) Switch functions Basic functions: Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device. Signal contact control voltage: 24 V (typical) Signal contact control current: typical PROFINET conformance class: Conformance-Class C PROFINET device function: PROFINET device PROFINET specification: PROFINET-IO RT/IRT, Spec. 2.x Redundancy: MRP (Media Redundancy Protocol) Status and diagnostic indicators: LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and FO status), and BF (Bus Fail) Supported browsers: Internet Explorer 5.5 or higher Security functions Basic functions: Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device. |
| Electrical properties | Local diagnostics: US1/2 Supply voltage US1, US2 Green LED FAIL Div. LED red LINK Link status Green LED ACT Receiving/sending telegrams Green LED BF Bus errors LED red Maximum power dissipation for nominal condition: 3.96 W Test section: Between the Ethernet ports 1500 VAC 1 min. 24 V supply (US) / FE 500 VDC 1 min. Transmission medium: Copper Supply Supply voltage (DC): 24 VDC (redundant) Supply voltage range: 18.5 VDC ... 30.2 VDC Power supply connection: Via COMBICON, max. conductor cross section 2.5 mm² Residual ripple: 3.6 VPP (within the permitted voltage range) Max. current consumption: 165 mA Typical current consumption: 165 mA (at US = 24VDC) Current consumption: 165 mA (at 24 V DC) Function Signal contact control voltage: 24 V (typical) Signal contact control current: typical Supply: Module electronics Supply voltage: 24 VDC Supply voltage range: 18 VDC ... 32 VDC (including ripple) |
| Connection data | Connection method: Screw connection Conductor cross section, rigid: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Stripping length: 7 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) Vibration (operation): in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz Air pressure (operation): 86 kPa ... 108 kPa (2000m above mean sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (3500m above sea level) |
| EMC data | Conformance with EMC directives: EN 55022 (emitted interference) ClassA EN 61000-4-2 (ESD) Criterion A EN 61000-4-3 (electromagnetic fields) Criterion A, 10V/m EN 61000-4-5 (surge) Criterion B EN 61000-4-4 (EFT burst) Criterion A, 2.2kV EN61000-4-6 EN 61000-4-6 (line noise immunity) Criterion A, Field intensity: 10 V/m EN61000-4-3 (electromagnetic fields) EN 61000-4-3 (electromagnetic fields) Criterion A, 10V/m 60950-1 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU |
| System properties | Functionality Basic functions: Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device. System requirements Supported browsers: Internet Explorer 5.5 or higher |
| Signaling | Status display: LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and FO status), and BF (Bus Fail) |
| ECLASS | ECLASS-11.0: 19170401 ECLASS-12.0: 19170401 ECLASS-13.0: 19170401 |
| ETIM | ETIM 9.0: EC000734 |
| UNSPSC | UNSPSC 21.0: 43222600 |
Description other products
