2701499 PHOENIX CONTACT - Technology Bsa

AXL E PB DIO16 M12 6P - Digital module

AxiolineE, Digital I/O device, PROFIBUS DP, M12 fast connection technology, Digital inputs: 16, 24 VDC, connection technology: 4-conductor, Digital outputs:16, 24 VDC, connection technology:3-conductor, Plastic housing, degree of protection: IP65/IP67

Product Code: 2701499

Partner cod.: 2701499

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/5b337e318ca1ed41a970b074b0b1c553/-S204x204-FJPG Width: 60 mm Height: 185 mm Depth: 30.5 mm Drill hole spacing: 198.5 mm Note on dimensions: The height is 212 mm including fixing clips.
Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Material specifications	Housing material: Pocan^® Color: anthracite
Interfaces	PROFIBUS DP Number of interfaces: 2 No. of channels: 2 Connection method: M12 fast connection technology Note on the connection method: B-coded Number of positions: 5 Transmission speed: 9.6 kbps ... 12 Mbps (Automatic baud rate detection) Transmission physics: PROFIBUS-DP-compliant copper cable Address area assignment: 1 ... 126, adjustable PROFIBUS DPÃ¢ Equipment type: PROFIBUS slave System-specific protocols: PROFIBUS protocols DP V1
System properties	Module ID code (hex): 0E59 Input address area: 16 bit Output address area: 16 bit
Input data	Digital Input name: Digital inputs Description of the input: EN 61131-2 types 1 and 3 Number of inputs: 16 Cable length: max. 30 m (to the sensor) Connection method: M12 connector, double occupancy Connection technology: 4-conductor Input voltage range "0" signal: 0 V ... 5 VDC Input voltage range "1" signal: 11 VDC ... 30 VDC Nominal input voltage U_IN: 24 VDC Nominal input current at U_IN: typ. 3 mA Sensor current per channel: typ. 75 mA (from U_S) Total sensor current: max. 1.2 A (per device) Input filter time: < 1000 µs Protective circuit: Overload protection, short-circuit protection of sensor supply
Output data	Digital Output name: Digital outputs Connection method: M12 connector, double occupancy Connection technology: 3-conductor Number of outputs: 16 Protective circuit: Overload protection, short-circuit protection of outputs; yes Output voltage: 24 VDC Limitation of the voltage induced on circuit interruption: -28 V ... -17 V Maximum output current per channel: 500 mA Nominal output voltage: 24 VDC (from voltage U_S) Output voltage range: 18 VDC ... 31.2 VDC Output voltage when switched off: max. 1 V Output current when switched off: max. 20 µA Nominal load, inductive: 12 VA (1.2 H, 48 Ã©, with nominal voltage) Nominal load, ohmic: 12 W (48 Ã©, with nominal voltage) Switching frequency: max. 5500 per second (with at least 50mA load current) max. 1 per second (with inductive load) Reverse voltage resistance to short pulses: Reverse voltage proof Behavior with overload: Auto restart Signal delay: max. 150 µs (when switched on) max. 200 µs (when switched off) Overcurrent shut-down: min. 0.7 A
Product properties	Type: Stand-Alone Product type: I/O component Product family: AxiolineE
Electrical properties	Potentials Voltage supply U_S: 24 VDC Power supply at U_S: max. 4 A Current consumption from U_S: typ. 8 mA max. 1.2 A Supply: Module electronics, sensors, and actuators Designation: Module electronics, sensors and actuators (U_S) Connection method: M12 connector (T-coded) Number of positions: 4 Supply voltage: 24 VDC Supply voltage range: 18 VDC ... 31.2 VDC (including all tolerances, including ripple) Current consumption: typ. 165 mA ±15% (at 24 V DC) max. 12 A Supply: Actuators Designation: Supply of actuators (U_A) for additional devices Connection method: M12 connector (T-coded) Number of positions: 4 Supply voltage: 24 VDC Supply voltage range: 18 VDC ... 31.2 VDC (including all tolerances, including ripple) Current consumption: typ. 3 mA ±15% (at 24 V DC) max. 12 A Electrical isolation/isolation of the voltage ranges Test voltage: 24 V supply (communications power and sensor supply, digital inputs/outputs)/bus connection: 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (communications power and sensor supply, digital inputs/outputs)/FE: 500 VAC, 50 Hz, 1 min. Test voltage: Bus connection / FE: 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (actuator supply)/24 V supply (communications power and sensor supply, digital inputs/outputs): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (actuator supply)/bus connection: 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (actuator supply)/FE: 500 VAC, 50 Hz, 1 min.
Connection data	Connection method: M12 connector
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP65/IP67 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 5 % ... 95 % Permissible humidity (storage/transport): 5 % ... 95 %
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: Wall mounting