2701625 PHOENIX CONTACT - Technology Bsa

IB IL 24 LPSDO 8 V3-PAC - Safety module

Safety-related digital output module, IP20 protection, for the SafetyBridge system. The module has four safe digital outputs with two-channel occupancy or 8 safe digital outputs with single-channel occupancy

Product Code: 2701625

Partner cod.: 2701625

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/2182c65be3908e489150116208cdf69e/-S204x204-FJPG Width: 48.8 mm Height: 119.8 mm Depth: 71.5 mm Note on dimensions: Housing dimensions
Interfaces	Inline local bus Connection method: Inline data jumper Transmission speed: 500 kbps / 2 Mbps (can be switched)
System properties	SafetyBridge properties Connection to I/O modules: max. 16 (safe digital I/O modules) Logic memory: 60 kByte Module ID code (dec.): 171 ID code (hex): AB Length code (hex): 18 Length code (dec): 24 Process data channel: 48 Byte Input address area: 48 Byte ((Operating mode: SafetyBridge 24words)) Output address area: 48 Byte ((Operating mode: SafetyBridge 24words)) Register length: 48 Byte Required parameter data: 1 Byte ((Operating mode: SafetyBridge 24words)) Required configuration data: 5 Byte ((Operating mode: SafetyBridge 24words))
Output data	Digital Output name: Digital outputs Connection method: Spring-cage connection Connection technology: 2-, 3-, 4-conductor Number of outputs: 4 (for 2-channel assignment) 8 (for 1-channel assignment) 8 Protective circuit: Overload protection, short-circuit protection of outputs Output voltage: 24 VDC (U_S - 1 V) Output current: max. 6 A (Total current of all outputs, -25°C ... 50°C) max. 4 A (Total current of all outputs, >50°C ... 55°C) Maximum output current per group: 3 A Maximum output current per channel: 2 A Nominal output voltage: 24 VDC Nominal load, inductive: see safety data Nominal load, lamp: see safety data Nominal load, ohmic: see safety data Behavior with inductive overload: Output can be destroyed
Product properties	Type: modular Product type: I/O component Product family: Inline Application: Functional safety Diagnostics messages: Short-circuit or overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor
Electrical properties	Maximum power dissipation for nominal condition: 150 W Potentials: Communications power (U Supply voltage: 7.5 VDC (see safety data) Current draw: max. 230 mA (see safety data) Potentials: Main circuit supply (U Supply voltage: 24 VDC (see safety data) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 6.03 A typ. 30 mA (all outputs set including actuator current) Potentials: Segment circuit supply (U Supply voltage: 24 V (see safety data) Supply: Module electronics Supply voltage: 24 VDC (via voltage jumper) Supply voltage range: 19.2 VDC ... 30 VDC Electrical isolation/isolation of the voltage ranges Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min. Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min. Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: Inline connector pluggable: yes Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 80 kPa ... 108 kPa (up to 2000m above sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (up to 3500m above sea level) Ambient temperature (storage/transport): -25°C ... 70°C Permissible humidity (operation): 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) Permissible humidity (storage/transport): 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: DIN rail mounting