2702331 PHOENIX CONTACT - Technology Bsa

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/2214a181cf224b48bed6414c21e9f028/-S204x204-FJPG Width: 45 mm Height: 130 mm Depth: 119 mm
Notes	General: Support by phone or on-site (fee is charged)
Material specifications	Housing material: Polycarbonate fiber reinforced
Mounting	Mounting type: DIN rail mounting
Interfaces	Ethernet (RJ45) Connection method: RJ45 Note on the connection method: Auto negotiation and autocrossing Transmission speed: 10/100 Mbps Transmission physics: Copper Transmission length: 100 m (per segment) Signal LEDs: Data receive, link status No. of channels: 6 (RJ45 ports) Ethernet FO Number of interfaces: 2 Connection method: SC Transmission speed: 100 Mbps (full duplex) Transmit capacity, minimum: -15 dBm Transmit capacity, maximum: -7 dBm Minimum receiver sensitivity: -34 dBm Maximum receiver sensitivity: -3 dBm Transmission physics: Single-mode fiberglass Transmission length: 36000 m (fiberglass with F-G 9/125 0.36 dB/km) 32000 m (fiberglass with F-G 9/125 0.4 dB/km) 26000 m (fiberglass with F-G 9/125 0.5 dB/km) Wavelength: 1300 nm Signal LEDs: Data receive, link status No. of channels: 2 (SC single mode)
Output data	Digital Output name: Alarm output
Product properties	Type: Book type Product type: Switch Product family: Managed Switch 2000 MTTF: 343.16 Years (SNÃ29500 standard, temperatureÃ25°C, operating cycleÃ21%) 153.37 Years (SNÃ29500 standard, temperatureÃ40°C, operating cycleÃ34.25%) 18.66 Years (SNÃ29500 standard, temperatureÃ70°C, operating cycleÃ100%) Special properties: Extended temperature range Signal delay: Ã¢Ã¢°¥ 6.5 Ãµs (Store and Forward mode, 10/100 Mbps, depending on the frame size) Insulation characteristics Protection class: III (VDEÃ0106) Degree of pollution: 2 Switch functions Diagnostic functions: RMON History LLDP (Link Layer Discovery Protocol) SNMP-Traps N:1-Portmirroring ACD (Address Conflict Detection) SysLog CRC-Surveillance Basic functions: Store-and-forward switch, complies with IEEEÃ802.3 Signal contact control voltage: typ. 24 VÃDC PROFINET conformance class: Conformance-Class B PROFINET device function: PROFINET device Fast Startup Filter functions: Quality of Service (8 priority classes) Class of Service DiffServ/DSCP Port-Priorisierung VLAN (up to 32 VLANs) IGMP Snooping/Querier (v1/v2) Auto-Query-Port Extended Multicast Filtering IP parameterization: DHCP-Client DHCP Option 82 (Relay Agent) DHCP server (pool-based, port-based) BootP DCP (Discovery and Configuration Protocol) MAC address table: 8k Management: Web-based management (HTTP/HTTPS) Role-based user management (LDAP, RADIUS) SNMPv1/v2/v3 Command Line Interface (Telnet, SSH) Redundancy: MRP (Media Redundancy Protocol) RSTP (Rapid Spanning Tree Protocol) FRD (Fast Ring Detection) Large Tree Support LACP (Link Aggregation Control Protocol) PROFINET S2 system redundancy Status and diagnostic indicators: LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed) Additional functions: Transmission of MMSÃandÃGOOSE (IEC 61850-8-1) Transmission of Modbus/TCP Time synchronization: SNTP (Simple Network Time Protocol) Security functions Port security: MAC-based, RADIUS (IEEE 802.1X), MAC Authentication Bypass Basic functions: Store-and-forward switch, complies with IEEEÃ802.3
Electrical properties	Local diagnostics: US1/2 Supply voltage US1, US2 Green LED FAIL Div. LED red LINK Link status Green LED Maximum power dissipation for nominal condition: 6.75 W (U_S = Min, T_amb = Max, DO_I = Max) Test voltage: 500 VÃDC Test section: for one minute 500 VÃDC Transmission medium: Copper FO Supply Supply voltage (DC): 24 VÃDC (redundant) Supply voltage range: 9 VÃDC ... 57 VÃDC Power supply connection: via COMBICON, max. conductor cross section 1.5 mm² Residual ripple: 3.6 V_PP (within the permitted voltage range) Max. current consumption: 1.5 A (U_S = Min, T_amb = Max, DO_I = Max) Typical current consumption: 235 mA (at U_S = 24ÃVÃDC and 25Ã°C ambient temperature) Current consumption: 260 mA Function Signal contact control voltage: typ. 24 VÃDC
Connection data	Connection method: Push-in spring connection Note on the connection method: Use only copper connecting cables providing the permitted temperature range (-40Ã°C ... 75Ã°C). Conductor cross section, rigid: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 9 mm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing) Shock (operation): 30g (ENÃ60068-2-27) Vibration (operation): in acc. with IEC 60068-2-6: 5g, 150 Hz Air pressure (operation): 80 kPa ... 110 kPa up to 2000Ãm above mean sea level (Without derating) Air pressure (storage/transport): 79 kPa ... 108 kPa up to 2000Ãm above mean sea level (Without derating)
Standards and regulations	Free from substances that could impair the application of coating: Yes
Approvals	Shipbuilding approval: Tested in accordance with IEC 60945 and IACSÃE10 ATEX Identification: Ã¯Ã II 3 G Ex ec IIC T4 Gc Certificate: DEMKO 16 ATEX 1709X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECEx ULDÃ16.0018 X UL, USA/Canada Identification: cULus UL Ex, USA / Canada Identification: Class I, Division 2, Groups A, B, C, and D, T4 Class I, Zone 2, AEx ec IIC T4 Ex ec IIC T4 Gc X Certificate: E366272 Note: ULÃ60079-0 Ed. 6 / ULÃ60079-7 Ed. 5, CSAÃ22.2 No. 60079-0 Ed. 3 / CSAÃC22.2 No. 60079-7 Ed. 2 EAC Ex Identification: 2Ex e IIC T4 Gc X Certificate: RU C-DE.HB49.B.00118/21 The following continue to apply for EAC Ex: Identification: ÃÃ¸ÃÃ¢¬Ã¸ Ã¼Ã¾Ã½ÃÃ¢Ã°Ã¶Ãµ Ã¸ÃÃ¿Ã¾Ã»ÃÃÃ·Ã¾Ã²Ã°ÃÃ¢ÃÃ Ã¿Ã¾ÃÃ¢¦Ã¾Ã´ÃÃÃ¢°Ã¸Ã¹ Ã´Ã¾Ã¿ÃÃÃÃ¢°ÃµÃ½Ã½ÃÃ¢¹Ã¹ ÃºÃ¾ÃÃ¢¬Ã¿ÃÃÃ ÃÃ¾ ÃÃÃ¢ÃµÃ¿ÃµÃ½ÃÃÃÃ½ Ã·Ã°ÃÃ¢°Ã¸ÃÃ¢ÃÃ¢¹ Ã½Ãµ Ã½Ã¸Ã¶Ãµ IP66. ÃÃ° ÃºÃ¾ÃÃ¢¬Ã¿ÃÃÃÃµ/ÃÃÃºÃ°ÃÃ¢ÃÃ ÃÃÃ¿ÃÃ¢¬Ã°Ã²Ã»ÃµÃ½Ã¸Ã Ã´Ã¾Ã»Ã¶Ã½Ã° Ã±ÃÃ¢¹ÃÃ¢ÃÃ ÃÃ¢¬Ã°Ã·Ã¼ÃµÃÃ¢°ÃµÃ½Ã° Ã¿ÃÃ¢¬ÃµÃ´ÃÃÃ¿ÃÃ¢¬ÃµÃ¶Ã´Ã°ÃÃ½ÃÃ¢°Ã°ÃÃ Ã½Ã°Ã´Ã¿Ã¸ÃÃÃ, Ã·Ã°Ã¿ÃÃ¢¬ÃµÃÃ¢°Ã°ÃÃ½ÃÃ¢°Ã°Ã Ã¾ÃÃ¢ÃºÃÃ¢¬ÃÃ¢¹Ã²Ã°ÃÃ¢ÃÃ ÃºÃ¾ÃÃ¢¬Ã¿ÃÃÃ Ã¸Ã»Ã¸ ÃÃÃºÃ°ÃÃ¢ Ã²Ã¾ Ã²Ã·ÃÃ¢¬ÃÃ¢¹Ã²Ã¾Ã¾Ã¿Ã°ÃÃ½Ã¾Ã¹ Ã·Ã¾Ã½Ãµ. ÃÃºÃÃ¿Ã»ÃÃÃ°ÃÃ¢Ã°ÃÃ¢Ã¸Ã ÃÃÃÃÃ¢ÃÃ¢¬Ã¾Ã¹ÃÃÃ¢Ã²Ã° Ã´Ã¾Ã¿ÃÃÃÃºÃ°ÃµÃÃ¢ÃÃ ÃÃ¢Ã¾Ã»ÃÃÃºÃ¾ Ã¿ÃÃ¢¬Ã¸ ÃÃÃÃ»Ã¾Ã²Ã¸Ã¸, ÃÃ¢¡ÃÃ¢Ã¾ Ã²ÃÃµ Ã¾Ã¿ÃÃ¢Ã¸ÃÃ¢¡ÃµÃÃºÃ¸Ãµ Ã¿Ã¾ÃÃ¢¬ÃÃ¢ÃÃ¢¹ Ã·Ã°Ã½ÃÃÃ¢ÃÃ¢¹ Ã¿Ã¾Ã´ÃºÃ»ÃÃ½ÃÃ¢¡ÃµÃ½Ã½ÃÃ¢¹Ã¼Ã¸ ÃÃÃÃÃ¢ÃÃ¢¬Ã¾Ã¹ÃÃÃ¢Ã²Ã°Ã¼Ã¸ Ã¸Ã»Ã¸ Ã·Ã°ÃºÃÃ¢¬ÃÃ¢¹ÃÃ¢ÃÃ¢¹ Ã¿ÃÃ¢¬Ã¸Ã»Ã°Ã³Ã°ÃµÃ¼ÃÃ¢¹Ã¼Ã¸ Ã·Ã°Ã³Ã»ÃÃÃÃÃºÃ°Ã¼Ã¸. CCCÃ/ÃChina-Ex Identification: Ex ec IIC T4 Gc Certificate: 2022122310115629 Corrosive gas test Identification: ISA S71.04.2013 G3 Harsh Group A UKCAÃExÃ(UKEX) Identification: Ã¯Ã II 3 G Ex ec IIC T4 Gc Certificate: PxCIMA22UKEX2702910X DNV GL data Temperature: B Humidity: B Vibration: A EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board
EMC data	Conformance with EMC directives: EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A EN 61000-6-2 EN 61000-4-5 (surge) Criterion A EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A EN 61000-6-2 EN 61000-6-4 (interference) ClassÃA EN 61000-6-2 EN 61000-6-4 (conducted interference) ClassÃA Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 61000-6-4
System properties	Functionality Basic functions: Store-and-forward switch, complies with IEEEÃ802.3
Signaling	Status display: LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed)