Not available 
| Dimensions | Width: 13.7 mm Height: 8.95 mm Length: 56.5 mm |
| Material specifications | Housing material: Metal |
| Mounting | Mounting type: Insert in SFP slot |
| Interfaces | Ethernet FO Connection method: LC Transmission speed: 100 Mbps Transmit capacity, minimum: -14 dBm Transmit capacity, maximum: -8 dBm Minimum receiver sensitivity: -32 dBm Maximum receiver sensitivity: -3 dBm Transmission physics: Single-mode fiberglass Transmission length: 20 km (Fiberglass 9/125) Wavelength: 1310 nm (TX) 1550 nm (RX) Signal LEDs: depending on the Factoryline device No. of channels: 1 (LC single mode) |
| Product properties | Type: Factoryline devices with SFP slot Product type: SFP module MTTF: 201 Years (Telcordia SR-332, temperaturefactorat40°C=1, stressfactorat50%=1, environmentalfactor =1) Format: SFP (Small Form-factor Pluggable) |
| Signaling | Status display: via a Factoryline device |
| Electrical properties | Maximum power dissipation for nominal condition: 1 W Transmission medium: FO Supply Supply voltage: 3.3 V (via Factoryline switch) Power supply connection: via SFP slot Max. current consumption: 300 mA Current consumption: 300 mA |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 75°C Ambient temperature (storage/transport): -40°C ... 85°C (non-condensing) Case temperature: max. 85°C (Operation) |
| Standards and regulations | Standard designation: Laser equipment safety Standards/specifications: IEC 60825 |
| ECLASS | ECLASS-11.0: 19179090 ECLASS-12.0: 19179090 ECLASS-13.0: 19179090 |
| ETIM | ETIM 9.0: EC000310 |
| UNSPSC | UNSPSC 21.0: 43222600 |
Description other products
